Bristolboy

Anyone ???

Right il start by saying I'm new to the site and the yamaha jog so if I sound a little clueless it's because I am ... Ok so I bought a liquid cooled jog for a bet and a bit of fun but it's not without it's faults the lad I bought it from had advertised it as having a mid race 50 kit mallosi 3.5 rollers new variater up jetted carb and race pipe but he said it won't idle and that he had messed about with the carb so I picked it up dirt cheap and planned to use it for short trips to the chippy etc I'm not looking to tune it to death as I have my old vtr1000 and r6 as main transport but I've looked everywhere for the standard carb settings without any luck there's no 2t oil res and no line going to the carb as he had been pre mixing the fuel which is fine as I always used to pre mix the fuel in my old enduro I'm really just trying to find 1 the correct carb setting as I'm hoping this maybe the reason it won't idle or at least sort one of the faults before I dive into what clutch springs he used and what rollers should be in the jog so PLEASE be gentle

Sorry new to the site just getting my bearings il get on to it now thanks

Thanks for the reply I'm not looking to tune it to death as a 50cc just to have it running A little better the main problem is it not ticking over I've tried searching for the standard carb settings but without any luck I'm sure I've read somewhere the mixture screw should be screwed in fully then back out 2 and a half turns ?? I've also seen lots of topics on different colour springs and roller weights but have no idea what they mean or what they should be as standard

Newbie so be gentle .. 40yrs young and love my bikes and I've had a few in the past newest one is a project moped which started as a bet and grown from there in fact it's why I've come to join the group as looking for some advise on tuning or identifying what work the yamaha jog lc has undergone. I know nothing about these peds only that it has apparently had a mid race kit ?? 3.5 mallosi rollers carbs been up jetted and has a yasuni pipe all of which means bugger all to me hence the reason to fill my brain with as much wisdom from you guys as poss bike does start and ride but once off auto choke it seems to bog down and needs to be revved or it dies ?? Mixture screws been messed with and couldn't find the factory settings for it either any help will be very much appreciated