Jump to content

bikerboi36

Free
 View Profile  See their activity

  • Posts

    10

  • Joined

  • Last visited

 Content Type 

Posts posted by bikerboi36

    Sr125Se Wiring problem

    in Yamaha Workshop

    Posted

    Hi I am needing help about the electrics to my 1985 SR125SE. I have had to replace the loom from a newer bike Circ 1991, I have checked the loom for continuity as well as the switches all that needed replacing was the rear brake switch and the ignition key to they were replaced and also checked for continuity and passed but i still cannot get any thing on the dash to show up i know i dont have a side stand switch as my model never had them fitted, and also noticed that according to the bible that is haynes bot for the 1982-1984 manual and the new on for 1982 - 2003 there is a spur from the brown wire to the brown wire on the L/H switch gear and also a spur from the ignition to the R/H switch gear wiring as well will I have to make these my self as they dont seem to be on the loom as it comes. Ant help will be greatly recieved.

    Nigel

    SR 125 Forks

    in Yamaha Workshop

    Posted

    Hi Nigel

    I would say its very likely ,though I haven't actualy done it , the only difference is like you say at the top & how you fill / drain them .

    One just has an O ring the other a threaded plug . :)

    What type os spanner should i use to take on the threaded plug

    SR 125 Forks

    in Yamaha Workshop

    Posted

    Hi all I am currently restoring a 1985 SR125 and was wondering if it is possible to use the fork stations and internals from a 2001 set of forks as the top ens where they go in to the yokes are different but according to the bible that is haynes it just tells me how to take them off so I am thinking its ok to strip the newer ones and then use the internals and the tops on my bike.

    Can anyone help me.

    Nigel,

    Oldest SR125 in the UK

    in The Bar

    Posted

    HI there this is just out of curiosity but i think I have the oldest SR125 in the UK still running. Mine is a 1985 version i know a lot of the peeps on here is from the 90's and the 2k era so is mine the oldest. Tell me how old is yours.

    Paint Colour

    in Yamaha Workshop

    Posted

    Similar question here about the same colour paint.. Halfords informed me that normally they don't just match the paint, they start with a manufacturers code to find out about metallic etc and then match it further if needs be..

    So, is there a list or source of paint codes anywhere that anyone has come across? Mine is a dark green 1994 SR125 and I know the paint is almost completely the original colour as it's been stored in a garage since 1996, with 850 miles on the clock!

    Cheers

    James

    Starting

    in Classics

    Posted

    Hi hope someone can help I think the problem is that the battery is low but advice needed. when i start the bike it wants to trun over and will fire the started but then cut out and all i then get is a clicking noise srom either a solenoid or a relay there is power going to the lights and this quickly drains. Am i right about the battery needing a charge.

    Many thanks

    Nigel

×
×
  • Create New...