New Members Welcome Area

Hello i have a TZR 125 1990 2RK, im looking to set the YPVS. Could anyone tell me what models of the DT will fit my bike and any others . I have which i believe needs the control box ( not sure if its the 3 wire or 5) So does anyone know how to gain the control box or could help me out ? Thanks Guys

hi can any one tell me how to premix my tzr 125 with 5 litres of fule thank u

Hi All First time on site - have already done DT125RE for my lad etc, liked that when I ran it in before letting him loose on it so bought myself a TZR125 (partly modified to R) one thing I would like to know is there a restricting element to stop the motor revving high - thought within the DT125 there was a mod to alter the wiring within speedo to allow full revs. Usually ride FZS1000 - but the little 2-stroke motors are brilliant, may try to find TZR250 later !!! Ray

Hi would anyone have any fairing brackets for tzr125 2rk?

Hi just joined

Hi all, greetings from another Newbie..In my 20's Owner since 23rd April of a 2010 FZ8 in great nice and sod all miles with extras too = one happy me after wanting a bike the last 3 years. Dan Sent from my SM-N9005 using Tapatalk

Just joined this heard some good things about the forum so I thought I'd check it out. but umm if anyone could give me some advice, I've been riding my R6 since last year and I want to move up to a R1 seeing as I'm 19 this year but I don't really know which one to get....

Evening Ladies and Gents.....new to the forum.....have just purchased an XS250 (Barn find) and looking to restore it back to some of it's former 'glory'......rode one for many thousands of miles back in my Navy days, Stevenage to Yeovilton.....really looking forward to getting stuck into it and any advice would be gratefully received. Cheers Unk

Says I don't have premission to use the upload feature...........what's up? I was logged in. Greg

I have an older yamaha (think is 1984) with a 9 digit vin and i need to get parts and diagrams.....HELP!!!! how do i get this figured out? most sites ask for a 17 digit number. Am i missing something?

Howdy. I got Betsy 3 years old 180 miles US import. Bought her cos I have a gammy leg and needed summat low. Love her to bits. Now the newness has worn off I am enjoying the odd fettle. Ben

Hi everyone just thought I would say hello and tell you a little about myself,i have been into bikes for about 40 years now and have 3 they are a bmw r1200s a wr400f and a recently acquired v75 autolube which is the main reason for joining the club in the hope I can glean valuable info off the numerous members regarding spares and the like so I will be asking the question on the appropriate forums in the near future,so hi to all and hope to hear off some of you in future. thanks Frank.

Anyone have any tuning suggestions? She quite happily gets up to 40mph but it would be good to go a bit quicker..55mph would be nice. I hear fs1e parts fit and I can adjust the gearing but I don't want to compromise going uphill because she is an auto...any advice greatly appreciated.

Hey everyone, good to be here! recently started riding a 2002 125 XVS Dragstar for last 2 months, its my 1st ever bike and really enjoying it! and because its im new to bikes i'll have to apologise for all the questions ahead of time! I think its running well, timing might be out a bit but nothing too much worry there (i think). however the rear brake doesnt seem too effective, just wondered how much, in general, it would cost to replace the rear brake shoes/pads? Also im from south east london/ croydon area and if people wanna meet up and ride and you dont live miles and miles away then would be good to meet up with a fellow cruiser biker cheers guy…

Dear All Blessings...I'm trying to establish the year model of my DT50. The number stamped on the head stock is 17W-20349. Any assistance will be appreciated. Wayne

Hello! My friend owns a Yamaha moped that is about 30 years old. It hasn't been used for the past 20 though! She's trying to find out what it's worth so she can sell it on. Does anyone know someone or a website where she can get a good valuation? We've looked online but can't find anything. Thanks! Julia

I'm after the rubber that connects the carb to the air filter where's the best place to get one? How does the old rubber come out does anyone know? Thanks Beefy

Hi guys I was wondering if any on could help. about 3mounths ago i broke down, it was the regulator. Iv replaced it, but since then iv had to replace it several times, is there somthing im missing here, as the new one is still has an out put of 15v which i know is to high!! any ideas......

Hello! I am new to this site but not new to motorcycles - I've had in excess of 100 in my lifetime!! I currently own a Yamaha VStar 1100 and cannot properly operate gear shift and foot brake with these foot boards interfering. Need foot pegs. Is there a conversion? Anyone done it?

Hi, I am new on here so would like to know whether there is anywhere I can post a wanted item notice. Edit by DDT: yes, in the wanted items section or classifieds. This is for newbies to say "hello". Topic locked.