Naked

Hi all, I've got an 81 RD125DX that has spoke wheels at the mo. Bought a set of alloys also off a RD125DX not sure what year.Is it a straight forward swap?, or are adjustments necessary?Thanks.

hi, i've just finished restoring a mk.2 rd125lc it's all standard apart from a micron period exhaust, i replaced the the standard 195 jet with a 210 as a starting point but it seems really sluggish before getting to the powerband i.e at low revs it doesn't want to pull unless you drop it down a gear or two. does anyone have any ideas on the correct jet size?

hi i have bought an early 1983 reg rd250lc 4L1 and the pump oil cover cover on right hand side is different than that on my 81 reg 250lc..was there a difference in the covers over the years.. here is a pic of my 83 bike... thanks sean have a look at my other bikes i have an am restoring

any one know which model had a ypvs servo motor controller? o have any wiring diagrams

now i dont know much about these bikes, so would someone please enlighten me : was looking at this website http://www.speed-trap.co.uk/Accused_Home/SpeedVSFines/SpeedVSFines.htm if you scroll down about a quarter of the way you will see "uk Prosecution Examples" and when looking at the types of vehicles came across the rd350r, that seems fast for a 350? whats the top speed of them ? i want one .. . . haha

I have a Californian model fzr600 which I purchased K&N double cone air filters for. The bike obviously needs re jetted or tweaked as a result as it is going like a bucket of s***! Just looking to find out what jet sizes I should get or can i adjust existing carbs in anyway. Any help would be greatly appreciated.

Sorry I wasn't detailed enough in the previous post. I didn't mention year, or type of bike, or shocks. I need the information on rear shock absorbers. If i go with the non GAS shock from HAGON will it work? Does anyone know. Hello everyone, I bought and FZR 1000 this past year and the shocks are completly thrashed. I really need help getting the shocks fixed. I looked up a few and I am not sure what options are fisable. It seems the best option is the OHLIN shocks. http://www.oncycles.com/browse.asp?departm...ory=sfy_fzr1000 This is going to cost me 739.00 plus tax. However i saw another company Hagon produces a non gas shock and i am not sure if this absorber wil…

hi ive just joined this site coz im in need of help ive jus bought a tzr 125 r 1992 4dl belgarda import..and have almost finished workin on it. the problem is the rear brake. when i brake the rear brake does work most of the time but some times it becomes soft and the rear brake pedal feels like its lost pressure and it jus touches the exhaust. ive bled the system changed the pads and dismantled the caliper and cleaned it. but it still seems to do this....however after when pressed the pedal when soft, and a few seconds later the pedal becomes firm again like the pressure has come back or something and i dont know what the problem is? i dont think there are any l…

Hey guys, Recently my YBR125 has started making a very loud & unsettling click/clunk noise when I apply the rear brake - it brakes fine but pretty much jolts the entire rear end! Anyone know what could be causing this? Thanks in advanced!

Morning everyone. The rear shock on my FJR 1300AS is leaking after just 1538 miles. My bike is 118 days out of warranty and so I asked the cost of a new one. A new shock is £5149, I was staggered. Has anyone had a similar experience?

Hi ,,I have a 1999 R1 and the Rear shock is now leaking and needs replacing £££££ ...what are my options ??? was looking at Ohlins ..However £750 is right out of my price range ... I really do need need a top Spec all singing and dancing Model ....I would rather not buy a stock replacement from Yamaha ,when there is much better shocks out there for a little bit more money Thanks Andy

hi there , for the info , my ride is yamaha fz 150 a.k.a naked version of yamaha yzf r15 ( india ). i'm looking for rear sprockets of 45, 46 and 47 tooths. appreciate if any of u guys / gals could provide the email address (s) of the said shop.

Hey, am new to this forum so i'll try to give as much detail as i can. I've just had my 600 mile service on my XJ6S and never really had any problems with it until after this. I brought it home fine on the motorway but when in the cold or wet mornings or on first starts during the day, the back wheel steps out quite a lot when i brake. Could they have increased the strength of the back brake without telling me, could it be just the cold tires mixed with the rain in Glasgow, could i have just hit a bad patch of diesel on the road (Although it was stepping out when braking in a straight line quiet a few times? Am a new biker and never really experienced this much at al…

Hi I have a 1993 YZF 750r which at the moment has a 180/55 rear tyre and i was just wondering if i might be able to put a 190/50 rear on it

Hello everyone, I am trying to get a rear wheel for my xj900s diversion to replace the one i have which cracked whilst removing seized disc bolts I have the disc so just the wheel will do. [email protected] or 01631 760032. Thanks very much., Alan.

G'day all, Does anybody out there have evidence based figures on the difference in rear wheel hp figures when running a 525 chain and sprockets compared to a 530 setup? Same bike, same ratio, same dyno, same day. Thanks Paul.

Hopefully someone here can help me with this. I need to know if any(new or old) model yamaha rear wheels will swap with the 1100 vstar. I'm not a concerned with the difference in diameter(IN FACT i'M LOOKING TO GO TO 18/5.5"). I want something with the same hub and will bolt up with minor mods. thanks kerry

Well, I'm a Uk citizen, so i have to wait till im 17 to ride a 125cc bike; I've been riding a DT50MX for a few weeks, and ive decided to keep this till i am 17, so I can sell it and get a big lump of money My Max price would be £1500, absolute maximum, as i'll have the bike for 4 years and done direct access course. Birthday on June 03 2009 I like Cruiser + tour bikes, but im not very sure what the difference between them is. It's for commuting to college every day (9.6miles each way) all along main roads. What bikes would you reccomend? ~Dufferz PS, I quite like the CG125.. any thoughts?

Simple question. Where can i get the tool to remove the Bar End Weights on my XJ6. I've tried alan key's up to a size 13" but they are still too small. Is there a tool i am missing? Thanks

Hey all, Just a quick one bought one of those dan dan GP extreme exhausts for my FZ1 and now i need to remove the stock which involves taking out the exup valve . any one know if this will have drastic effects on the bike ? and will i need to buy a power commander once the slip on is fitted for re-mapping? Also what a surprise it didn't come with all the fixtures , no exhaust mount or tension springs . And after emailing them 4 times now finally got a reply saying there in the exhaust ..... which there not! so anyone know where i can pick some springs up ? Cheers Dan