Naked

when i take my hands off the bars the wheel judders a bit, i'm thinking steering head bearings, could it be this? tyres are fine so cant be that :?

Has anyone else experienced the handle bars shaking on their xj600s diversion? It happened when i took my hand off the handlebars to stretch my back as my backpack was quite heavy. I was going around 30 mph.

hi i just bought a frz genesis-88 and tought that i bought a regular but after going trough the papers im starting to wonder... Is there any one her that can tell me how i can separate them.

hey guys and girls if any, was woundering how the fuel injection system works? YZF-R125 is my bike.

I drive a 2005 yzf600r, it has been running fine since February up until recently. a while ago it started bogging down at full throttle or anything over 60mph. I originally tried running sea foam but it didnt help. so I took the carbs apart and cleaned them and put in a K&N air filter, got everything back together, and it ran even worse. It idles fine, but had trouble picking up speed, seemed like it would catch some power for a second and jerk forward and then lose power again. barely went over 40mph. so since i put the new air filter in I found out i was supposed to rejet it because of more air flow. So I took it apart again and rejeted the carbs with a new dynojet …

Hi all hoping for a little help/advice .I have an fzr600 1990 (see gallery) the fuel tap on these bikes are prone to snapping.was wondering if there are any direct replacements of the usual metal type.those of you in the know will be aware the fzr has a long plastic one. Thanks for any forth coming help.

Hi I has looking at getting a Arrow exhaust for my XJ6n but don't know whether to buy the system that removes the cat or keeps it. I know that in the UK emissions are not tested so a cat is not needed, but if I was to take the bike touring would the de-cat pipe be a problem Or would there be any running problems cat vs de-cat Thanks

Can anyone help me out in finding where I can buy a full arrow exhaust system for my 09 yamaha xt125x I've seen a few on these forums with them on but I can't find anywhere myself any help would be appreciated thanks.

Hi All. Greetings, I am new to the club. I am looking for advice on replacing the OEM exhaust on 95 model FZR1000. I need to replace the collector box ( with EXUP valve, due corrosion) but think it may be better to replace the whole system. Any ideas who still make a system for this old model ? Thanks Sean South Africa

There's a full Micron system on the FZR i've bought. I started to fiddle with the fairing, noticed some fixings missing. Upon further investigation, i noticed that the brackets where the bolt positions would be aren't there. Assume these have been removed or were part of the exhaust system. I'll fabricate something up to allow securing of the fairing, tho also looks like the panels have been trimmed at the rear to allow clearance for the system. Anyone else encountered similar?

Just like to announce the evil that had befowled my bike has been undone. It is finally pushing out all of its ponies and a few extra due to a K&N filter. It sounds a lot better aswell now the plates have been taken out of the carbs. Regards

Hi Guy/Girls, I'm Planning a trip down the south of Spain, to accompany me on this trip I’m looking to buy a full set of luggage that will not cost the earth but is good quality (Is there such a thing?). Any suggestions??????????

99 r1 oiln change time .. been using pro 4 but its been mentioned that semi synthetic might be better ...? opinions ?

I need to know what the differences are between the 92 and 94 FZR600R. I am looking at two different bikes that can be combined to make one awesome bike and have a few parts lying around. The big piece is if a tranny from a 92 will work on a 94. If there are any little details like the wiring harnesses are different, that will be very helpful to know. Thanks

I'm thinking if buying a Yamaha FZX 250 Zeal. Early as poss after 1992 The first thing to tackle is.....How do I get the seat a bit higher? Thinking about... having extra foam in seat professionally done! It looks dificult because of the smooth design wrapping under the tank. Providing larger wheels. Particularly front wheel. Longer shocks on rear. Any suggestions welcome. RegardZ.

Hi, Thinking about buying an FZ 1 Fazer but need the help of you experts. I am fairly short and would prefer to lower it what can be done? has anyone done this and how ? is a lowering kit available and what are the side affects of fitting one if any. I ride a V Max now and lowered that enough by just changing the seat but they are fairly low to start off with. I have seen some FZ1 lowering kits of up to 40mm advertised on some American web sites and wonder if they are any good. Thanks John

I picked up a 1987 FZ 600. Looks like a fun bike I decided to restore it so I powder coated everything. I have the carbs and forks Moons Super Cycle being rebuild. www.moonssupercycle.com I have been looking and there are no FZ site and vary little info out there so If anyone know of any good sites let me know. Here are a few pix of the bike when I got it Here are a few pictures of the frame and some other parts now. Parts have been Powder coated with a Gloss Blacke and a silver flake. One of my custom colors I will post some updated pictures soon!

Hi All, I'm new to the forum. I just bought my first bike an 88 fz600. I also got my license recently so i think this is a great starter bike. I picked it up for cheap but a few things are not working and i don't have a manual so I would ask you guys to help me out. 1.) i gear up and it works fine but then when i gear into the first and stop the bike always goes into neutral no matter what i do or how many time i push down on it? 2.) All my lights work on the bike except the headlights but sometimes they come on then they die again, what could that be? 3.) I need to tune it up a bit to bring it back to life, what oil should i use? how much oil goes into thi…

Hi I picked up a 1987 FZ600. It was in bad shape. The rims had 8 layers of paint the frame was just starting to rust, the wire harnes was cut up.... A few pictures: I ripped it apart and had the carbs and forks rebuild. Bought a few new parts... I powder coated just about everything! Frame wheels forks... then started to put it back together. I need to find a nice fuel tank so if anyone can help me with that I still need to ceramic coat the pipes and muffler and install afew things like the tail and turn signals but its running and looks like a fun bike to drive. Let me know what you guys and gals think. …

hello! my first topic here! i just bougt a fz 750 88, when i got home i discovered i ticking sound when i give it throttle( can i say so?) sorry for my english! its not the valves, maybe the timing chain?? if anyone have some information about things that can be time to check on this bike at this milage it would be great!!!it has about 70000 km on it. thanks!!