Naked

I have just had a second rear caliper replaced after the mounting point was found to be cracked. Has anyone else had similar problems?

i have a fjr1300.looking to change exhaust for a little more sound and performance.. any suggestions

I would like to hear from riders with experence on this bike. Any problems? Advice? What to watch for.

Nah, I'm not talking about disturbing individuals exposing themselves in public places! I'm referring to the little relay boxes Motrax sell. They apparantly correct the flash rate of LED indicator lights that have just been installed on a bike which originally had standard bulb indicators. I've got to fit one of these Motrax Flash it relay boxes to my 2007 R6, but havent got a clue where and they dont come with instructions. Can anyone advise where you plug it in?

Does anybody know where I can get a yamaha virgin mobile fleece in red If you can help me I would be very grateful..

Hi, Just bought my wife a ybr 125 to do her CBT on and hopefully pass her test. I need a small flyscreen to put on it and to stick the l plate on any ideas ? Must be cheap Alun.

right im new to riding a big bike and for the life of me i carnt get to the foot break with out it fealing like im shoving my foot underthe bike is there a way that i can bring it further out from the enguin at all ?? soz not doing verry well with spelling to day lol

Hi there, Just to say what a good site this is and a great source of information. Just passed my bike test a month ago and now am the proud owner of a yamaha xj600 1995 model. My question is i need to replace the footpegs for the pillion pegs and the main footpegs for the rider. The rubbers are falling apart and are looking a bit tacky. What i wanted to know is where can i get a set of foot pegs for, I would rather some after market ones but i dont know where to look and what would fit. If anybody would be able to advise i would be greatly appricated. thanks.. pinhead123.....

Does anyone have a haynes manual to hand for one of these. I'm changing the fork seals this evening and need to get some fork oil. I'm hoping to get some at lunch but being a knob I left the manual at home so don't know how much to get and what grade.

I just rebuilt my forks and I seem to have misplaced my service manual. Does anyone know how many cc'c or ouces of fork oil a 1984 700 Virago takes??

Hi, does anyone know which way the springs go in the forks of the R125 because i just had them fixed after a crash and the bloke who put them back together put the springs in the opposite way round to how they came he said the tighter coiled bit of the spring should be at the bottom of the fork and the more spaced part of the spring at the top, I dont have a clue if it would make any difference being in the opposite way round, hope someone can help me!

Hello out there! I have just finished stripping the forks down on my Genesis and found the chrome to be slightly pitted, If I fit new seals they will only last for a couple of months before leaking again. Can anyone recommend a good machine shop to grind, plate and refinish the tubes, I don't really want to fit pattern parts and an original parts purchase could possibly end in a domestic!! Thanks.

.....is now making good progerss with Kwak's GP effort & been running in the top 10 so far this season. Shinya Nakano had a horrific 300kph crash only a week ago, & is ready to race this weekend in Spain with some new spec Bridgestones 8) Interesting SideNote: Nakano has a brother Shinja, that races CART cars here in the states 8)

I have a 1988 FZR400. I'm looking to get some crash mushrooms for it, but as is often the case, parts are hard to find. Does anyone know where I could find a set that would fit my bike. Maybe the same size as an fzr600 or something? Thanks in advance.

Hi y'all. I bought my YBR 125 (2006) about three weeks ago and have hardly had the time to use it since. I noticed yesterday that the front wheel is not exactly free running, in that the pads rub stopping the wheel in about 1/4 rotation after a 'good swing'. The pads were fitted by the Triumph dealership I bought it from the day I collected it, so are 37 miles 'old'. The fluid level is well up in the resevoir, but not excessively so. I took it apart yesterday and cleaned out all the dust etc. and the caliper seemed to be quite free running. Should I just let these bed in, of should I be covering it all in copper-ease before hiring a truck and taking …

Can anyone give me a link to site where I can buy a front brake light switch for my 2000 fazer 600. I not having much luck not EVEN on ebay

Hey, mine is a bit worn so I want to change it, can I use anything from ebay like this: http://www.ebay.co.uk/itm/1pcs-Front-Brake-Clutch-Cylinder-Fluid-Oil-Reservoir-for-YAMAHA-YZF-R6-05-13-/321274143701?hash=item4acd6e63d5:g:dWcAAOxyRhBSqr5w

Hi all. On my R125 the other day, I was going along a smooth flat road, and as I coasted along (with only my right hand on the handlebars) I took my weight off the bar, as many do. Fortunately I had my hand still resting very lightly on the handlebars, as all of a sudden the front end started to wobbly VERY violently, with the bars vibrating from side to side. Could this be down to front wheel balance, or a sign of a bearing going, or perhaps something more serious? The front tyre has been on since new, and done about 12,500 miles. It's due for a change soon, probably next week as it has less than 2mm of tread now, but before taking it in I wanted to see if a…

I’ve just taken ownership of a YZF R6 (06) what a stunning bike, The guy I bought it of said that he had changed the front sprocket so that it was minus 1 tooth. My question is what difference will it have from my wheel speed to my speedo. If I do 30mph passed a 30mph speed camera will it flash? Thanks Dave

hey all me again, just remembered i forgot to ask if anybody must know if the front wheel of a 02(first injection model) bike will fit onto the front of a 01 (last carb model) bike? thanks Sam