Naked

can anyone tell me if the fzr400 lower panels fit the 600 just cant find 600 panels ? cheers all

Guys i have this bike, just wanna know the specs of it. Like how much power, torque etc... Plz help i searched about it but nothing found... It's the smallest bike i have even seen with twin disk brakes in front!

Well Beezknezze, recommended I stop by here and hangout and see whats happening - riding a FZ1000 EXUP with a 1040 big bore kit and I am a certified EXUP junkie (you wanna see my garage!) Cheers Si

Thort id better say hello to everybody on here im new to this forum and new to owning Yamaha motorcycles ive just bought a 1993 YZF 750 R and a very impresive bit of kit it is as well after riding a GS1000 before this bike (brakes that work ). Trev

i have a tzr125 and my speedo is not working does any one know what the problem could be?

does any one know whats involved in converting from r/h dip [europe spec] to left hand dip [uk spec] and approximate cost

hi all. i just bought my first 'proper' bike - Thundercat. I used to ride one of those thumping beemers. I couldn't belive how hard it was to find a good forum for Yamys. So- hi and help. My cat's been given a choker or restrictior. Can any one help please to make my cat breave properly. Also - are there any rideouts or cafe meets in the pipeline. Thanks. Ps- wow what a bike!

Hello everybody, In my family we run a 1981 Yamaha XJ550 (black with the orange pin striping)which we have owned since 1989 and used since as everyday transport all year round (winter and summer). It has now reached roughly 90,000 miles without an engine rebuild as yet (but read more of later) and still on original clutch/drivetrain. Naturally during our time of ownership it has had a few replacement exhausts (thanks to all that lovely corrosive salt they put on the roads in the winter in the UK ), we've had to do a partial re-wire (original fuse box etc. carroded to bits), many tyres, many fork seals and many chain and sprocket kits plus many, many regular oil and f…

got these babies for the EXUP..needed a bit more acceleration changed from standard 17/47 to 16/48

hello all, hail from the states but strong roots in ireland, had my divvy as you all call it for about 4 months now and am looking for some parts its a 95 yamaha seca II or diversion, im looking for tires, preferably some a little bigger if possible,plastics for over the engine,different mirrors,and exhaust, also seat, i would really appreciate it if anyone could help,lost an uncle last year whos life was biking and im dedicated to finishing his ride if you catch my drift.

Well I have gone and done it. Bought and payed for, pick it up tomorrow from dealer in Aberdeen, first in the N E of Scotland (apart from the demo). The only other thing with torque like it is the Triumph Rocket 3, but that is massive and has 2.3 litres to play with. Can't wait MT-01 Will post some pics soon

I'm trying to determine the most comfortable seat for my V Star.

Recently acquired an '87 FZ600 from a friend after the engine went on him and he upgraded rather than rebuild it. I'd like to get the bike running again, but I've got a feeling the internal damage may make repair of the existing engine prohibative (no solid evidence yet, haven't started diagnostics). In preparation for the worst, though, I'm trying to find out what options I have for replacement of the existing engine... particularly if anything other than the 86-88 FZ engine will bolt in, or can be made to bolt in without excessive hassle (Radian? XJ? FZR with some work?). Also looking for any sites or other forums that would help support an FZ600. Any info/hel…

tryin 2 sort me suspension 4 fazer 1000 still on mez4 tyres/standard settings anybody got any setup info/best tyres etc. cheers in advance

can anyone tell me were i can check my vin number out on a web site

Hi i have purchased a yzf r1 2001 a few weeks ago and am atempting to fit a yoshimura rs3 full system (no insyructions) . The system is all but fitted but i am stuck on the ex up, i am aware that the new exhaust does away with the ex up but i am unsure as to what i need to remove. So far i am left with the two cables hanging down that i have disconnected from the stock exhaust. Is anybody able to give me any advice many thanks marley

Hi all, I am in the process of building a streetfighter type thing and I need a bit of R1 assistance. I am using a speedo/ tacho from an early R1 and need to find out the wiring details for the plug that goes in to the back of the speedo. I have a plug but it is from a different bike so the wires don't match what is in the R1 Haynes manual. The plug is rectangular, and has either 16 or 14 wires going in to it. Can you help? I need the colours and where they go in relation to the plug, eg from the back, left to right and top to bottom, with the clip at the bottom. If you can help it would really save the day as the only other option is trial and error and I don't want …

my wife can't touch the ground on her FZ6. I'm told the front fork tubes can be raised up some, the rear suspension softened, and foam carved out of the seat. Does anyone have any suggestions on what can be done?

i just replaced the number plate on my bike as the old one was ruined because of the plonker who had the bike before me had added a new can but put it in the wrong place, as a result of this it bubbled my number plate and got it all greasy and was dripping gunk onto the wheel (not good). so i oredered a new plate but decided to be stupid and order it an inch smaller so rather then being the proper 9 *7 its an 8 *6. who is going to be bothered by this, would it fail its mot?? also i have decresed the size of the L-plate due to it cracking. who else has a smaller plate?

what ya reckon...took my time on these babies today