The Bar

Hey everyone. Passed my test on Tuesday on my Yamaha yzf r125.Over the moon.Great to hear those words...You've passed. Anyway I am looking to buy a Yamaha Fazar yzs 600 and fit a restrictor kit to it.A mate is selling his which is a 2001 with 17000 miles on the clock,with full service history.He is looking for around 1500 for .Is it straight forward to have someone fit the restrictor kit and do you think the price is reasonable Many Thanks Ian

Hi everyone.Passed my test last week and picking up a second hand Yamaha Fazer 600 tommorow.Can anyone link me good websites for blinging up the bike a wee bit with chrome covers and bits and bobs.I am gonna buy ss downpipes afetr the winter,but want to get a couple of bits meantime Thanks Ina

Hi there could someone give me advice on the best place to sell my bike .... ive been told to put her on ebay but shes a really nice little bike and dont think i would get a fair deal on there Ive never sold a bike before so any advice would be a help .......... many thanks x x

Ok my technical knowledge of machinery is well next to basic........ok ok its crap but hey I don't deny it I need to know whether its cheaper to make gaskets from the paper they sell or are you better off spending more to get the prefab stuff. I dont have barrel loads of cash to throw at my bike and need the cheapest and easiest due to suffering from CFS ( chubby finger sindrome ). Any comments welcome

Hello everyone, another question again from here in belgium... I found these nice slash cut end pieces for the stock exhaust on the dragstar 650. https://www.polo-motorrad.de/de/k-02-endstuck-slashcut-rechts.html. Now my question is, how does these attach, and does that mean the end damper of the stock exhaust has to be removed? I want besides the looks a bit bigger sound, but not too loud. first idea was to drill few holes through the end plate, as i read here has a good effect. But with these slash cut's, does it mean the end plate ot the stock exhaust has to go? Anybody experience with this? thanks a lot Peter

Hi ive just bought a completely customed aerox and ive fitted a new belt, fuel tap, spark plug rollers, but it still struggles to get pat 45mph any suggestions guys plz im gettin desperate

Had a wierd thing happen a while back. It was a stinking hot day (approx 40 degrees C at 6pm). Was riding along at about 60kmh and the scoot just died. No spluttering. Just complete and immediate loss of all power. Suspected it was electrical but the thing started easily and off I went. Same thing happened again that night and as per previous time, started again no problems. Since then the headlight has stopped working. Doesn't work on either lo or hi and the dash illumiination doesn't come on either for the two dials. Indicators and brake light work fine and bikes starts and runs perfectly. I've checked: -Light switch continuity (ok) -hi/lo witch coni…

Changing from bulb to ped on an Aerox 2016 - how do I what wires match? I have the stock bulb light and a STR8 tinted led light with indicators built in - bought from ped parts - i need help help wiring them up so has anyone got any suggestions or know where what wires should meet

Does anyone know if the variator pulley has teeth on? I've received one from Pedparts.co.uk and am just wondering if it should have teeth on the inside circular hole

A few questions i really need help with, hopfully some of you motorbike lovers can help me,, 1. Where on earth does the coolant hose/ water pipe go ?! there is literally nowhere it CAN go on my bike :\ 2.How can i make my throttle more responsive? its got a nice bit of boost at higher revs, but before got a new cylinder kit ( 50cc parmakit) and piston kit, it used to run with the boost as soon as you pulled the throttle, now it takes time and takes ages for that boost to kick in... 3. How far /fast can i go to run my new stuff in, as above ^ ?... Iv been told about 300 miles not exceeding 30mph, but my fooken speedo doesnt work lol, iv been guessing going …

Hello guys.. am new here so hopefully you will have some good knowledge.. I have bought a bit of a project 50cc aerox have been putting it together and when I tighten up the bolt on the end of the crank variator side, it all locks up?.. if I loosen the bolt it all frees up and spins any ideas?.. crank all moved freely before rebuilding head and fitting water pump side everything went smoothly until variator.. please help

Hi, I have just bought an aerox with either a 70cc big bore or a 77cc not exactly sure, it was fitted by a garage and is still being run in by me so it does have a higher ratio of 2 stroke oil. My mates 50cc aerox will do 45mph however mine struggles to reach 40mph at the moment. It has been de-restricted and has a leo vinci tt exhaust. Any suggestions as to why..... it could just eb the higher ratio of 2 stroke oil. Thanks

has anyone got an pics of their yamaha aerox 50cc engine? need either a diagram or an actual pic from the water pump side, i need to work out where my hoses go to the carb and etc..... can some one help me please? im not asking for much...

My son rides an Aerox 50yq. We keep going through headlight bulbs and it has been suggested that we have a fault lighting resistor. I cannot seem to find this part anywhere to purchase? I am wondering if I buy a complete headlight kit will this come with a new resistor or will I have the same problem with the new headlight set?

well basically my aerox started yesterday and it wouldnt really move, just revved... but now it wont even start and when it does it just cuts out when ever you touch the throttle.. can anyone help me please im really lost and i need to get it running, not sure if thats enough info, but thats all that happens, jus cuts out...

When replacing the exhaust on an Aerox R 2016 what do you do with the hose pipe that's normally connected to the stock exhaust?

will an aerox 100 starter motor fot a 50?

Hi. when i was out diving my aerox yesterday, suddenly my throttle stoped working? and i dont know what the problem is , hope anyone can give me some clues on what it could be so i could try to fix it.

Can anyone advise me of the torque for the 4 nuts on the studs on the cylinder head for my YQ 50. Putting it all together tomorrow after removing a broken exhaust stud.

i there , i have an aerox yp 50 57 plate. I have just had the bike . When i had it it started no problem but the other day i had it ticking over and giveing it a few revs then i turn the bike off. Then i tried to start it but it wont fire up. The engine is spinning and i have check the spark plug . Can someone help? thanks