The Bar

Hi, First post on this, just after a bit of advice. I have recently bought a 600 Fazer, W reg, and seem to have some problems starting it with a cold engine. If I start it like I normally would on a bike, it will fire up, and then die. So I find that I have to push the button, turn the throttle and hold it for a couple of seconds to keep it ticking over. I have looked at the plugs, cleaned some dirt off them and put them back in. My other thought is that would it be related to the carbs at all? As when I start it, with choke, and set it so it's ticking over (just above 1,000 revs), it is on the side stand. But then if I am to sit on the bike and lean it up right, after…

Hi There, Can anyone help me as either I am being daft or previous owner was being even dafter.. I've gat a 650 Dragstar 1997 which I've had for a few months.I had it running on the day I bought it but since then I've had it off the road while I repaired and changed a few things. Back to the question, the petrol tank doesn't have a breather outlet, well at least I can't find one and petrol flow stops after a few seconds unless I remove filler cap. The manaul shows a breather outlet in the top of the tank just behind the large "hole in the tank",, I do have the breather outlet pipe but I don't have any kind of breather outlet in the tank. There is a small hollow …

Hi all, While doing research for my Yamaha I discovered this forum, and hope to receive guidance. I'm new to bikes, and even more green when it comes to engines, so I picked up a Clymers manual. This was a recent acquisition, and the previous owner was more interested in painting the tank than oil changes, new spark plugs, air filters, fork seals/covers, chain and a sprockets. At about 13,000 miles she needs some work, but runs strong. I try to do something every week to eventually get her back in good form. New fork seals, intake manifolds and a repaired header is in the near future. Das [Edit] Valve issue solved. Recently acquired 1978 XS400 aft…

I am glad that I found this site. I purchased my 2009 VStar 1300 Tourer on 3 July 2010 after completing the H-D "Basic Rider's Course" with less than a mile on the odometer. It now has 1562 miles on its odometer. I did not ride one week end and have not ridden since 8 August 2010 because of surgery to repair a torn triceps tendon. I can proudly say that my VStar 1300 is awesome! Take care, Chris Stevens http://www.facebook.com/?sk=messages#!/photo.php?pid=693009&id=1681912380&ref=fbx_album

Hello everyone!! I am new to this forum...u mite hav guessed. Just thought id introduce myself b4 i get started! I currently own.. a dt125lc and a dt125lc for offroading.i have a roadbike tzr 250 and my big bro has an R1 but he don`t trust me on it!!! anyway i hope i have an excellent experince here!!! 8)

Hi All, Just Joined, Just got back on 2 wheels after a year, whey hey!! Speak to you all soon. Peace

Hi all, just bought myself a black / silver 2006 DT125R SM. Less than 3000 miles on the clock. This is my first ever bike. Still not rode it as it's on the reserve and I need to get a wee petrol can to put some juice into it. It's got a DEP exhaust and a front brembo brake. Will get some pictures up tomorrow and hopefully be taking my first ride!

Hi all... After a few weeks without a bike I popped down to my local dealer to have a look..sat on a FZ6n and it felt perfect for me and my dodgy back... Anyways after a bit of negotiation I managed to get a new s2 spec with R&G bungs and official tank pad for £4250 on the road inc 12months tax - it was pre reg'd but I thought it was a good deal!? Anyways, picking it up in a few days but have just realised it does not have a hugger as standard ( I think) if it does not is it worth having one? Cheers all

hello i've decided to write a little introduction about me because i have left a bit late. I'm Dave Jarvis, 17, almost 18 and trying to write best i can haha. live in Dorset on an 'island' evryone hates called portland, but i love it here, great fun for taking the dtr offroad:). as i said i own a Yamaha DT125R, i have had a derbi senda 50cc SM, and a Suzuki TS70 which was great fun for the time i had it haha. i also am working greatly on mt DTR almost every day ye that's about it so hello

Hello everyone!! I am new here and cant wiat to hear what everyone has as far as advice. I purchased a 73 yamaha RD250 about an hour ago lol. I need some part and most importantly a carb. I am trying to restore this rust bucket to its original glory. Does anyone have any advice on where to get one or just parts in general. Thanks in advance!

if you're fairly new in here why dont you post up a wee bit about yourself, how you got into bikes, any funny/interesting biking tales to tell? the more people get to know each other the more chat comes, we've got plenty of members here so start talking!

Hello all. Just joined forum last week and thought I should say hi to everyone. Forum looks friendly. Hoping to do lots of riding this year on my R6 and maybe see some of you around Hartside/Westgate Hill and beyond?

Hi All, I have just joined so this is my first post but have a few things I need help with. I have just purchased a 2009 FZ1n my first question is about the ecu mapping I have been told that these machines had problems in the early days with low down torque and were fixed by using a power commander and new exhaust slip mainly on 2006 2007 models, is this the case and has this been fixed on these later models or should I investigate further??????????? Secondly I am looking to buy some parts for the bike for safety and style but could do with some advice on quality price and your own personnel experiance, plus any additional information is always welcomed to improve m…

Hi there. My names Kev and I'm from Wiltshire and ride a 2007 MT-01 with Akropovic's

Hi there, im quite new to biking and this forum. I passed my CBT a few weeks ago looking to insure myself on a 07 YBR, i am still in the process of looking for sensibly priced insurance! Im now thinking of taking my full test but it has just changed. Does anyone know any details of the new test? Ive had a look at the DSA website and its not all that clear, ive heard that the new restriction will be 44bhp for 4 years and that i wont have to take a theory/hazard test as i already have a full car test under my belt. Is any of that true? Any help much appreciated guys. CJ

Hi all can anyone clarify if you can still do a restricted access with a passed theory test as a 24+ on a 125cc and ride up to a 400cc for 2 years then apply for a full licence with no further test Sparky67

Well, I don't do forums much. I had, some time ago, posted looking for help on my 82 XJ650 (found another forum that had lots of help). But the carburetors are still giving me loads of trouble. So I decided to get me a new bike. Today I'll be picking up a 2012 FJR1300. It's been a showroom bike since the dealer got it new but since it's older they can't sell it as new. Getting a fair deal on it. I really like the lines and feel but gotta get a trunk bag with back rest for the wife to ride with me. Just thought I'd share the happy news. Keep the shiney side up.

After suffering with a sore arse a few weeks back I splashed out on a Mustang seat for my bike, it was a lot of cash but figured I've only one arse and I plan to to go on a few long trips this year. Took the first trip on the new seat today, it was only about 140 miles but first impressions were good. Just a run down to the coast to take advantage of the sun and to have a bite to eat, here is the view from the burger van looking down on Pompy

Hi all First time action. I have just bought a 1979 DT175MX in need of heavy tlc. I also have a FZS600, my first big bike. Glad to be here and hope yo have constructive conversations with yoy. As the rebuild on the DT175 progresses I will try and upload some photos.

Hi, have just today bought an XJ 550. It needs a bit of TLC and I am looking forward to using it very soon. I thought I would just drop in tonight to say hi and introduce myself. You seem to have all the answers to all the questions I might need to ask soon, so hope to speak to you all soon.