Search the Community
Showing results for tags '125'.
-
Hi All. New to to the forum so thought id post up my first thread. Have just picked up a 1997 Virago XV125 (pictured below) this is my first bike. Its been off the road in storage for around 3 years, hence it has a low milage of 3700miles on the clock. Its in overall good condition and just needs a bit of TLC. Prior to me collecing the bike im lead to beleive its had new plugs and the fuel swapped out. Ive heard it running and its appears to run fine. Am hoping to use this to get some experience on it prior to going in for my test. Im fairly handy with spanners so if it neds any work doing im pretty happy to look at most things. Chain looks a little rust covered so will look at serving the bike as soon as possible. Plan to look at Oil & Filter Change, Air filter, Fuel System Flush-out, Brake check + overhaul if req. Would it be recomeded to get a new chain and sprockets ??. Feel free to throw in any free advice. Thanks, Greg.
-
hi, i have a YBR125 '61' and have bought the official Yamaha LED blinkers - http://www.yamaha-motor.eu/uk/accessories/?productCode=YBR125&redirect=false - installed them as it shows.. indicator with the resistor in parallel with it and they supply 2 10ohm resistors, i have installed front and rears of these and they flash too fast and are illegal at the speed they flash. does anyone know of any ways to sort out the speed of flashing without installing a new relay? i have tried installing more resistors but still doesnt seem to help. the original bulb indicators were 10w/12v and my battery is 12v. any advice will be much appreciated. thanks. Oli.
-
Hi Guys and Girls, Just a question of curiosity really, and its my first post, I have had a 2006 YBR125 for the last 18 months and i have put 16,000 of its 20,000 miles on it, it has a full service history (just to keep the book up to date really) and i always service the bike myself aswell in between actual services, just for peace of mind and to keep it running as good as the day i borght it, all parts needed are replaced as soon as they need to be and i don't put spending the money on it off when it needs to be spent, all in all it is a very well looked after bike, however i ride it in all weathers including last winter, which as many of you remember in the UK it droped to around -19 degree's. coldest i ever rode it in to work was -17, took the following day off after that lol. this lead's to my question's of how may mile's should i be doing before i replace the wheel bearings? (just had to do the sprocket carrier bearing at around 18,000 mile's) and i think i should be replacing the wheel bearings around now even though they feel fine, (more just for peace of mind again really, would hate for them to lock up at 50mph) and secondly, what is the life expectancy of these bikes? it doesnt owe me a penny yet as i have hardly had to spend a penny on it other than general maintanance, Chains, sprockets ect... Thank's for looking and will look forward to here your reply's Cheers Tris
-
Hi everyone, i have a ybr125 and quite frankly the headlight is Sh!t, i have upgraded the bulb to a 40/45W halogen whitch made a dramatic differance from the standarrd bulb however for night time B roads its still a little scary. now im not an idiot trying to street fighter a 125 or anything, however.... i have seen the dominator headlights and standard they take 60/65W bulbs added to that obviously there are two of them next to each other.... i also have a 55w bulb but that is blue... so quite hard to make out what different objects are at night when everything is blue, and i cant seem to find any brighter bulbs to fit the standard headlight... so im wanting to know do any of you have any experiance with the dominators? or know of a much brighter buld to fit my standard headlight? hear's a link to the dominators that i am looking at... http://www.demon-twe...nator-headlight i know it would probably look rediculouse on a YBR, however it is purely for practicality as i use it as a work-horse commuter. any feedback on this would be muchly appreciated, thanks Tris
-
Hey guys was going for a ride on my DT 125 2000 when half way through my trip the bike just died. and after removing the spark plug and replacing it there is no spark. I have replace the ignition coil and regulator but still no joy the the dash works etc..... but bit strange how the bike just died. any ideas?
-
Hi, hi. So now I've joined the biking community, albeit a little later in life than most as I'm 28, but thought it was about time I joined a forum. Got myself a new YBR Custom back in May, had really wanted an XVS 125 as my first bike, but they are like gold dust! Was with the Mg-Rover.org forums when I had my previous car and it was great a resource and place to chat about people with interests, so I look forward to sharing stories with all you helpful folk. Jon.
-
Hi Guys, I'm new here but have found some really helpful things while I browsed over. I got my YBR last week, no problems, running like a charm. This is my first bike, and only really started riding the day before I got it. (CBT) The only problem I have right now is my headlight. When I got it, it was working, I've not dropped or crashed it but now, it won't work!!! When I turn the ignition on (Key to on position, NOT starting it) the parking light (Small bulb) comes on. When I start the bike (Elec start) the headlight is supposed to come one, but mine isn't! When I flick to high beam, nothing, no light on the dash to notify of it either. I have replaced the bulb, and checked the only fuse I could find (Next to the battery) I have checked what I can of the wiring, and everything looks to be spot on... but what is wrong with it?? Please help if you can, I soil myself when the street lights have gone out. Thanks in advance. Sanial
-
Hi all, im new to here and pretty new to motorbikes.. but was wondering if either on a YBR125 (11plate) it was possible to remove the baffle and if not, the recomendations on an aftermarket exhaust for it? to make her *prrr* a little louder and maybe give her a little more push, if i lose a little power im not too fussed. plus was after some recomendations in general on mods/aftermarket peices for the YBR125? all suggestions very thankful =D