
Everything posted by Airhead
-
clutch diagnosis dt 125 lc mk 1
sorted what? Well was it what I said or something else some feedback would be good instead of 'sorted now' ! is there rubber rings between the plates on your clutch?
-
It's starwars day
May the fourth be with you Get In
-
clutch diagnosis dt 125 lc mk 1
you need to be careful with the kickstart mech. You'll no doubt see a white plastic bushing under the spring. on the face of this bushing there are cutouts that go around the end of the spring, if the bushing is turned a little the end of the spring will not be sitting in the cutouts and this makes the whole assembly wider by the thickness of the spring...so the engine cover doesn't seat properly.
-
clutch diagnosis dt 125 lc mk 1
yeah you can select all gears easily when the sprocket is turning
-
1983 MX100 cutting out- video
just change the plug and give it a good tonking, isn't it obvious?
-
clutch diagnosis dt 125 lc mk 1
Unhook the pull wire to the switch
-
clutch diagnosis dt 125 lc mk 1
yes just drain the oil first, if you're really careful you may even be able to re-use the gasket if you don't tear it when you take the cover off, watch out for the kickstart spring end coming out of it's locating hole because that's a good bet to tear the gasket too!
-
DT175MX head gasket leaking
yep the tired old threads just pull out of the barrel, may need a helicoil if you cant achieve a torque spec on one of the studs
-
clutch diagnosis dt 125 lc mk 1
you probably wont need to replace the plates, all thats required is to pull them apart oil the faces and re-assemble. Pay heed the plain plates go in a specific order so the cut outs are evenly spaced around the full circle
-
Old but not grown up
Hmm sometimes that can be difficult too (from what i've heard)
-
Old but not grown up
Happy birthday meatloaf
-
Not quite a Yamaha production model.
Stunning Mark...more pics?
-
1976 Yamaha V50
Oohh a Raleigh Chopper
-
clutch diagnosis dt 125 lc mk 1
you're wrong i'd say...of course you can change gear and see the sprocket goinig faster/slower. Just select neutral, it'll still spin though until a final drive chain is on
-
One hit wonders
Nigel Farage would never call the EU nice
-
clutch diagnosis dt 125 lc mk 1
slice Pablo has stated the final drive chain isn't fitted, so in that case even with the clutch lever pulled in the sprocket will spin because of the 'drag' from the oil
-
Just bought a new bike !
That's a beauty slice. good for you
-
Stafford Classic Bike Show Sunday 26th April
Does it stink the tent out bippo :0...mmm Butchers Tripe Mix...
-
Fault code.
not being funny but I think you should get someone to look at this bike, it may be the switch it may not but if no use just replacing things you don't know are broken, lots of people have multimeters...BORROW ONE!
-
Removing chain on xvs 125
check theres no split link first, it's only a low power bike so I'd fit one myself if there isn't one fitted
-
Fault code.
why not test it with a multimeter
-
Fault code.
yeah so anyway, what of the answer you were given ages ago...the one Ttaskmaster referred to?
-
Tempus Fugit
well within a day you do? Happy birthday both you guys
-
Hey folks :)
Greetings mahou, yeah they are good first bikes...have fun
-
YBR 125 signalling problem
have you tested the bulbs then, that's the obvious starting point?