Noise

Well sorted out the wires last light with some heat shrink so they are all nice and tidy just need to extend them to reach the controls and then connect them up but i will do that once she is off the bench as she's a bit tall at the mo. Got the seat fitted to the bike so thats another job done, just need to put the final coat of paint on the swing arm and fit that then she can come off the bench and onto axle stands to start sorting every thing else out.

Bout pissing time you started doing some thing to these bikes you have. Was half expecting to turn on channel 5 and see a documentary on this bloke in a mankini ownng stupid amounts of bike lol

Cracking find that mate! but i also prefer them in yellow.

Stick a nacked woman on your handle bars facing the camera, ill watch it then!!!!!!

Looking good. That aircraft stripper stuff looked like it worked

Just spent 2 hours out there tonight on it and all is done just need to put some heat shrink on them and get them in the bars and that's that job done. The head light was the hardest part as now I've done them to turn on as soon as the ignition is turned on. Only blew 3 fuses as the wiring diagram in Haynes was shit so just connected the 4 wires till I found out which way they had to go ha ha.

I got bored 2 mins in. I'm not into blogs vlogs or what ever they are, more into watching dumb fucks hurting them selves.

Braved the freezing cold cave last night (soon warmed up with the heater on tho) stuck another coat of paint on the swing arm and is just now waiting for a rub down and its final top coat, then i got stuck in on the wiring and the only hard ones that ive gotta figure out is the lights as with the stock switches you can have the lights off, dipped or on where as the way i want them is off, on, main beam all the rest is a doddle. Here are a few more pics, few of how i had the bike last week to sort the clutch out and the others for all the wires ive gotta get into the handle bars Lidls £9.99 work mate is brilliant!! Thought id better prop it with a bit of wood O and before you all say the shed is now clean and tidy. It got into a wee bit of a shit tip at that stage

Lets all just remeber not to pitch up next to Bippo just in case the tiger wants to have another little lay down. If not you can always share a room with me bip

Glad your ok dude and you've learnt the lesson, i done the same with regards to neglecting my bike of oil, turned out to be very pricey ha ha. with a bit of luck it should just be the side stand switch as the gods above have said. Take it easy and remember to lube up your dry bits

No not my Ginger nuts, (they are burnt and are more brown than ginger)

well i think your all a bunch of horse-loving spunk pigs.

You'd have to ask betty as she is very particular to who she sleeps with. I do have two Car ports and can supply some card board to sleep on and some news paper to keep you all warm

Nice One Felix. Cracking buy.

Didn't work mate, came up saying a 404 error what ever that is?

I know it's not going to be seen but are you going to rub it down with some wet and dry to get rid of the fat ass syndrome? Its just I see you got some orange peel gong on

Thank you all very much with all your help I've now got a fully working clutch. I ow you all a ginger nut biscuit. DT50 yours may get held up at export so best you buy your own. Loves to all

Well you know how it is Tommy, either bend it over or smash it in. Once the wife is Home from work I'll get back out there and sort some more out.

Great what a little bit of card can turn into. Get on and paint it and get it on the bike.

Ha ha, well after last night I'm surprised it didn't go through the side of the shed.

No IIRC these Ones don't have pips. Haynes book just says first fit plain disc then friction plate then plain etc finishing with a friction plate. The pain plates do have dimples on one side of there face but that's all they got.

Dont start on MidgetClownPorn.com nothing wrong with it at all. Small people need some probing too! Some times my thoughts even scare me............mostly about midgets but most are bike related

Is this bike done now???

Looks like this is gunna be a corker. With regards to the 350 barrels, could you not see if they are cheaper to get them over the pond? but spose if you keep it as close to stock as possible your be able to sell it better if you do so in the future. Good luck with it