yamadoger

could any one post up a service manual page on installing the kicker gear in a 78 dt 400. I can not seem to get it to wind up correctly and don't have a book for it. thanks

if i'm understanding you correctly, the rubber bushings are most likely to blame. Try and get the part # from yamaha and check to see if you can get them anymore. you could always solid mount them but it will chatter your teeth.

I think it would be great, there is nothing out there for Yamaha sleds especially vintage sleds. This may not be a big deal for some people, but here in Minnesota and the great north woods we get snow. It would get used believe you me. THANKs tO All

i am looking for an original green & white 69-71 ct1 gas tank, dings dents and some rust are good things. i am in the u.s. E-MAIL ME @ [email protected]

ok so i got the 70.5 mm from wiseco, this way i can hone it out and make sure it gets a nice cross hatch. wow these are spendy

check to see if your compression is getting low

my mic says its 70mm,and the mic doesn't lie. The thing is the piston in it now appears to have about 10thousanth slap on the skirt end, and on the top. So i cant help but think this was never the right piston in the first place. Also when i got this bike i tore the top end off only to find the piston in backwards .

wow you fellas come up with some wacky stuff over there.

wow you guys come up with some pretty wacky stuff over there.

well my cylinder is 70mm bore but the piston is stamped 0.50mm and the #1 or 4 followed by 52p2 is stamped at the top. I have sent for a new 70mm piston, but wanted to know were this other piston is from. any ideas???????

can u believe this kids asking price. sorry i meant copperhead road. who ever gets this bike may get the pleasure of seeing their rear wheel pass them on the freeway some day.

i have noticed over time that these old yamaha bikes just kinda evolve from one another.in a way i always thought of the as the small block chevy of motorcycles. but i don't like chevy...........GIVE ME TWO WHEELS OR GIVE ME DEATH.

thanx foamy, that was my first thought . was wondering if any body had done a head swap on these before,as i hear they are hard to find

thanx foamy, that was my first thought . was wondering if any body had done a head swap on these before,as i hear they are hard to find

Hi all, was wondering if anyone knows of other heads that will fit my 69 ct1 175, have a mess of old dt 175 parts 74-76 era but haven't checked them yet. keep on yamadoggin