drewpy

do you remember these famous people from the 70's?

read the first review you come to http://www.amazon.co.uk/exec/obidos/ASIN/B000KKNQBK/b3ta-21

Alien Eggstravaganza

spooky http://sheepfilms.co.uk/interact/eyes.htm

cool little bike, the rd80 to the YOC

tin man ask major mods he can get anything apparently

sorry you posted ages ago, must have missed you. have a look in the classic section there are some informations on the xs there. are you sure its 1988? they stopped making them circa '82

wurth stuff is good, I use motorex 622. spray the chain after a ride while its still warm and let it set overnight, wipe excess off and it shouldn't spray oil everywhere.

worth noting and to keep a check on them.

are you visiting anything in Particular in Europe or just seeing the way the wind blows?

one of the better ones

Stafford county show ground has an international classic bike show twice a year. Blackhat's going for the weekend.I'm sure if you have the thread measurements he could get you some. better still make a trip of it. its in the YOC calender, end of this month it will take you a minimum of 4 hours just to walk roun. and there is always a guzzi vendor there, not sure who it is though!

I think he's from Greenland

check earth too

Jay if ever your bike broke down, you could be Jay walking

With a fully charged new battery, the reg rectifier won't affect the sparks as its for charging purposes.

its a white thing with metal on it

good luck, and bring some rock back

I see George Whites is open again in Bolton!

what if they can't read English?

nice, that is a sweet ride

it will make a difference if you don't get the correct bore. what does your M/C look like?

nah, I've taken out flush suds by arc welding a nut over the nut hole and stud end. The alloy was never affected in all 4 that I have done. why did you buy exhaust studs from Italy? stainless Steve does them and you can find him at Stafford end April (you are going aren't you?) take a list and parts book if you have never been before

love the way the rotor and prop unfold

threading the spokes is fairly straight forward, I used you-tube to do mine. its truing them up that I bottled it and sent them to Bill the wheel.