drewpy

7 deadly sins?

get the train

Aye, think of him every time I get on the FZ. He knew he was dying when he gave it to me. RIP OT

As i said you can track me on the website. there will be 1000's there. 1/2 marathon sets off 9am and I am setting off 13:07 I've managed to raise £240 so far, a little bit to go to make my £300 goal

Tommy and I went a few years ago, was ok for an afternoon and a ride out

:welcome: to the YOC David Essex

on this year. Its not bad and near Southport beach http://www.woodvalerally.com/ Victoria Park, Southport - 16th and 17th June 2018

Axel foley, is the beverly hills cop ace theme tune https://www.youtube.com/watch?v=V4kWpi2HnPU

Axel can't get beverly hills cop theme out of my head now ?

Ey up Ja lad,

it is, its you :D BTW I can see this

very similar. Aintree was once on the GP circuit for cars, auto union's etc and think the same for bikes too at one time

Went to Aintree today to watch the races, quite good as the last time i was there there was no golf course or cafe onsite. the downside was loads of tree so you can't see all the track now. the missus was banned from entering bit of a selfie https://www.youtube.com/watch?v=kU78tfVRmkU https://www.youtube.com/watch?v=phuflmxjjLc https://www.youtube.com/watch?v=P7WtoEARglU

it snowing again ?

cheers Tommy, just done the haigh hall 4 miler tonight and it went well. 2 miles downhill with 2 miles uphill. I've looking forward to it and managed to raise £220 so far with work sponsors. aiming for £300 my race number is 1087 which you can use to track my progress over the course

no to easy out, if they snap your in deep shit. they are hardened steel and very brittle. only way is spark erosion which is an engine strip to take to engineers your gonna have to pay someone to do something if you can't get a welder, although they are really cheap to buy and with practise easy to use. I've drilled my snapped studs out but had to use reverse cobalt drill bits as the steel work hardens due to heat cycling. Unless you know what you are doing I'd advise to get someone to do it. I made an alloy template to guide the drill bit straight and to correct depth.

you need decent connectors, those blue things are OK for cars and other shit. invest in a crimper and buy the right bullets for the trumpet

https://yamahaclub.com/forums/topic/24734-welcome-to-the-y-o-c-new-members-section/

just found a lovely cafe we can visit Wetton Mill tea rooms http://www.thecaptainsguide.co.uk/wetton-mill-tea-rooms-c434.html https://www.google.com/maps/dir/Darley+Dale,+Matlock/Wetton,+Ashbourne+DE6+2AG/@53.1385378,-1.8765116,12z/data=!4m14!4m13!1m5!1m1!1s0x487989b5234fed89:0x218743ba7fcd2e19!2m2!1d-1.596115!2d53.165952!1m5!1m1!1s0x487a3c91e5368199:0x93657d90752af017!2m2!1d-1.8583248!2d53.1020224!3e0

I just been out to Wray bike night tonight and spent £20 on fuel granted I still have a nearly full tank, but I only did 150 miles

Eccles actually, but a Bee lover all the same :p

I'm getting Alex to look into it, he's a bit busy ATM though

Cheers Jimmy I had to get a C3 in the end as that was the only bearing in the correct size. TBH I couldn't detect any movement and have since checked the bearings and they are still smooth and tracking right

ciao Flavio. lets have a look at your bike then?

Hi Neo, welcome back, good luck on the move (eventually)