bumbaclartio Posted June 9, 2020 Share Posted June 9, 2020 (edited) After my previous work on the bike I found the problem to be low compression and the cylinder was replaced.The bike now starts every time and idles at 1500, as i set it to that, but as soon as any play with the throttle happens and the revs go above 3k, it doesn't want to come down past that mark. Pilot screw is fine and from my knowledge there is no space for an air leak anywhere. Edited June 9, 2020 by bumbaclartio Link to comment Share on other sites More sharing options...
blackhat250 Posted June 10, 2020 Share Posted June 10, 2020 Hi there " iwould disconnect the throttle cable , start bike , lift slide manually [ rear with airbox connector off , see if it settles and revs,,, to isolate cable , Link to comment Share on other sites More sharing options...
jimmy Posted June 12, 2020 Share Posted June 12, 2020 As above, and I would still spray carb cleaner or similar around all the hoses and connections just to positively rule out any leaks Link to comment Share on other sites More sharing options...
Recommended Posts