huxley Posted August 13, 2019 Share Posted August 13, 2019 Hello All, After 3 years of owning my DT 175 E I have decided to start work on it properly. The bike will not start even though it has fuel,a good spark,timing is spot on and crankcase seals have been replaced.This was not my main problem. I can only get second gear which is why I threw a cover over it 3 years ago.I have now split the crankcases to have a look at the gearbox which all looks o.k,but I have a question. There are 3 selector forks.One is on a shaft on it own and it moves on the shaft.The other two are on a separate shaft of which one fork moves and the other does not.Is this usual. Also can you post pictures on this forum ,if so how. Thanks for any replies Mark. Link to comment Share on other sites More sharing options...
neversaydie Posted August 14, 2019 Share Posted August 14, 2019 Youll need to use a hosting site like Photobucket to upload photos from Link to comment Share on other sites More sharing options...
jimmy Posted August 14, 2019 Share Posted August 14, 2019 I don't use photobucket since they tried to hold us all to ransom a while back Postimage.org is my preferred hosting site 1 Link to comment Share on other sites More sharing options...
blackhat250 Posted August 14, 2019 Share Posted August 14, 2019 The forks slide on shafts, ,bent shaft or corrosion ,, Link to comment Share on other sites More sharing options...
Recommended Posts