Jump to content

Featured Replies

Posted

hi,all,would anyone know,anything,about why my nutral light is not working its not the bulb and i dont where else to look,i,m taking my cbt on sunday,and i have a yamaha 125 sr,p reg,and that little green light,will come in handy for the frist few weeks,... :)

  • Moderator

I've had that same prob with my XT for over a year now :blink:

Bottom line is my clocks are shagged! <_<

But your issue might be something internally in the gearbox? :unsure:

Hi there,

I wonder if the neutral light switch has gone u/s? I have no idea where it would be located on your bike but I would look for a couple of wires coming out of the top of the gearbox and try to trace them to see where they go, then maybe try and see if they have any current passing through them.

Andy

  • Author

hi,thankyou for the advice its good and easy to follow,i shall have a look,and all being well the green light,will be ok,ill let you know how i do :unsure:;)

  • Moderator

Hey i see you live in cornwall, how far down i am not far from bude on the north side just in devon

Aha found you in Hayle, wrong end of cornwall for a look at the prob quickly tomorrow morning

Merv

  • Author

hi,merv,i was up in Boscatle,on sunday...bude is not that far from there....so i was pretty close....good to read someone is on here from our neck of the woods,...what do you ride....??if you don,t mind me askin.. :D

  • 3 weeks later...

Ive got an SR, but im down in helston, bit far, lol.

you see where the chain goes in to the gear box, take off that little pannel (two screws, one at top, one at bottom, before flywheal case join) and make sure the wires arent cought on the sporket or that they are shorting. if that doesnt help, im afraind uve got two options;

1. put up with it, lol.

or

2. take it to your local bike garage, and ask them to try and fix it.

(ps, u sure its not the bulb, or its conections on the dash set? they can work loose sometimes, or get corroded)

  • Author

my 125 sr,in in the hands of a friend of mine,for a little bit of tlc,so everything will be sorted....then i,ll be out biking... ;)before i brought her she had been used very little,.... idle for a year, ;)

Go gentil on the throtle then, let her do 100 miles on low revs, otherwise you may do some damage to the engine, as bits need to "remember" where they sat when the engine was running.

where, roughly,are you near?

kim

  • Author

Thanks,for the advice,i am gentle on the throttle,just wish i had more time to be in the saddle,but work tends to get in the,....i live near st.ives.... ;)

lol, just finished college, so ive got loads of time atm.

got a new job starting up tho, so i wont be riding so much. :(

i dont know the north coast so well, but i know the lizard peninsula like the back of my hand, been riding it for the last year and a half.

ne idea when ur gonna take ur full test? or is it in the distant future?

Kim

  • Moderator

Well if yuo folks are heading up thwe north cornish coast anytime let me know will see if we meet up somewhere one day

Merv

  • Author

on sunday,a group of us are riding to ...badgers holt, dartmoor,id,be happy to hook up with anyone from this forum,for a cuppa and a chat.. ;)

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...