Moderator Cynic Posted January 15, 2017 Moderator Share Posted January 15, 2017 Well its home and..... em.... well... OK its a shed. It has not had a lot of love and the person I got it from has bought it to fix and bottled it after working on it a tiny bit. Good: Engine is oil tight, looks unopened save the top end Really good spark Frame looks good and straight, No bad rust anywhere Bodywork is complete if a little 'weatherd' Bar basic fixings its pretty much all there. Suspention sound and working Forks have minor pitting outside of the seal area, look oil tight too. Bad: Don't think it will run, fuel in it was yellow....... Petrol in the gearbox Water in the 2stroke tank Engine really shitty Wiring is a DISASTER Plastic tank with some of the body fixings in it cross threaded, new one on me that. Photobucket seems to have gone to the dogs so pictures might have to wait. Anybody know a useable photo site that doesn't advert you to death. Link to comment Share on other sites More sharing options...
Moderator drewpy Posted January 15, 2017 Moderator Share Posted January 15, 2017 can't be as bad as my Gilera Link to comment Share on other sites More sharing options...
Moderator Cynic Posted January 15, 2017 Author Moderator Share Posted January 15, 2017 Biggest pain atm is finding any kind of manual. At the moment I can get an engine manual and have found a wiring diagram which in reality looks pretty generic for these bikes like the engine. The rest of the cycle parts will have to be parts fiches like csml and fowlers and old fashioned experience. I have joined the Aprilia forum too. It does feel a bit like a car nut getting an Alpha ? Like something you should do even though its probably a bad move. Link to comment Share on other sites More sharing options...
finnerz89 Posted January 15, 2017 Share Posted January 15, 2017 I know the feeling, having recently acquired an Aprilia myself. It's already costing me money! Sent from my E6553 using Tapatalk Link to comment Share on other sites More sharing options...
cotterpot Posted January 16, 2017 Share Posted January 16, 2017 Cynic have you tried PostImage https://postimage.io/ Link to comment Share on other sites More sharing options...
Moderator Airhead Posted January 16, 2017 Moderator Share Posted January 16, 2017 also seen people use flickr or something? Link to comment Share on other sites More sharing options...
wild foamy Posted January 22, 2017 Share Posted January 22, 2017 The fuel in the oil would be my main concern... And water in the two stroke tank... If you're missing any bits I know a guy down in Swansea that most likely has them, could be an idea to drop in another loom if the wiring is that bad Link to comment Share on other sites More sharing options...
Moderator Cynic Posted January 22, 2017 Author Moderator Share Posted January 22, 2017 Well its a frame with forks in my garage now, came apart ok. Going to rebuild the motor anyway, its like 30 odd quid for just about all the consumable parts on the motor except the piston. We live outside of Northampton leaving the daughter with a 10 mile trip on country roads from her intended 6th form college. Reliability over performance. Suspension looks good all but one of the bolts came out, the knuckle is fkt but that is hardly a shock and I can build my own loom. All in not too bad, could have been better but could have been worse, did a little dance when the sw arm pivot came out easy. That would have been a bitch. 3 Link to comment Share on other sites More sharing options...
Moderator Airhead Posted January 22, 2017 Moderator Share Posted January 22, 2017 Dad Dancing...Ohh No!! 2 Link to comment Share on other sites More sharing options...
Moderator Cynic Posted January 23, 2017 Author Moderator Share Posted January 23, 2017 I dont care. Anybody finding out the sw arm spindle is free would. The only one that siezed in its bush comes out with the shock so it can be sorted on the bench in a vice. Link to comment Share on other sites More sharing options...
blackhat250 Posted January 23, 2017 Share Posted January 23, 2017 You know the rules,,, ,wheres the pics, Link to comment Share on other sites More sharing options...
Moderator Cynic Posted January 23, 2017 Author Moderator Share Posted January 23, 2017 I have them, its just finding a host. I have also just discovered the 'double conrod' or whatever the Italians call the rear suspension link that connect the dog bones, chassis and shock should be made of sodding gold. I hope the bushes/bearings are replaceable. 1 Link to comment Share on other sites More sharing options...
Moderator Cynic Posted January 26, 2017 Author Moderator Share Posted January 26, 2017 On 23/01/2017 at 8:15 PM, Cynic said: I have them, its just finding a host. I have also just discovered the 'double conrod' or whatever the Italians call the rear suspension link that connect the dog bones, chassis and shock should be made of sodding gold. I hope the bushes/bearings are replaceable. Well you can get the bearings, 7quid a pop or so, i'm not sure how they come out. Anybody changed the bearings in a suspension relay? Link to comment Share on other sites More sharing options...
finnerz89 Posted January 26, 2017 Share Posted January 26, 2017 Did the ones on my DT. Made a puller with some threaded bar and some sockets. Would be easier with a press though, one was a bitch to get out Sent from my E6553 using Tapatalk Link to comment Share on other sites More sharing options...
Moderator Cynic Posted January 26, 2017 Author Moderator Share Posted January 26, 2017 2 of em have fallen apart once it was off, just the outer races left. Was thinking I could cut them out maybe? Bench vice works as an effective press when your closing it with a decent set of stilsons Link to comment Share on other sites More sharing options...
blackhat250 Posted January 26, 2017 Share Posted January 26, 2017 29 minutes ago, Cynic said: 2 of em have fallen apart once it was off, just the outer races left. Was thinking I could cut them out maybe? Bench vice works as an effective press when your closing it with a decent set of stilsons I"v fked a few vices like that , they go stiff, Link to comment Share on other sites More sharing options...
Moderator Cynic Posted January 26, 2017 Author Moderator Share Posted January 26, 2017 Were not talking land rover chassis (60 tonnes) bushes so I might give it a try, only one complete one to get out and that will like as not dissintergrate. Will use heat/ cold to put in the new, like crank bearings. Link to comment Share on other sites More sharing options...
finnerz89 Posted January 26, 2017 Share Posted January 26, 2017 I used the vice at work to get the last of mine out. The outer races should press out but cutting will work Sent from my E6553 using Tapatalk Link to comment Share on other sites More sharing options...
Moderator Cynic Posted January 26, 2017 Author Moderator Share Posted January 26, 2017 Ok first pictures of 'Arrow' as she has christened it already. https://www.flickr.com/gp/147905465@N08/j2CBHP 1 Link to comment Share on other sites More sharing options...
Moderator Airhead Posted January 26, 2017 Moderator Share Posted January 26, 2017 looks good Tiberius Kirk, I'd have been made up with that at 16...no encouragement from my parents about bikes 1 Link to comment Share on other sites More sharing options...
Recommended Posts