jimmy Posted November 5, 2016 Share Posted November 5, 2016 Yea, as long as you can turn the engine over. Top Tip:- Do NOT touch the engine with any body part when cranking it over. If it does spark, you won't need to see it, you WILL feel it 2 Link to comment Share on other sites More sharing options...
jimmy Posted November 15, 2016 Share Posted November 15, 2016 So 10 days since the last reply....do we have an update Link to comment Share on other sites More sharing options...
Spike101uk Posted November 16, 2016 Author Share Posted November 16, 2016 Update on this , I've discovered the 3 white wires going to the regulator from the plug that connects to the stator wires was melted and corroded, unsure as to what component has failed or if it's just old wiring, but I'm struggling to find out the correct wire I need so gonna bypass the plug and connect the 3 white wires from stator straight to regulator via the spade terminals , and see what happens, I've also tried getting a reading from the other 2 wires from stator leads, and so far got nothing, I know this is to do with ignition but not sure I was testing it right with the multimeter. or I was and the 2 coils next to stator are the issue , Link to comment Share on other sites More sharing options...
neversaydie Posted November 16, 2016 Share Posted November 16, 2016 Hes started another thread in the workshop section now Jimmy "Three White Wires" 1 Link to comment Share on other sites More sharing options...
Recommended Posts