KevtheRev Posted March 20, 2016 Share Posted March 20, 2016 At last ! I managed to get hold of an LC tank in fairly good nick . It's got some filler , scratches and small dents but no rust as far as I can see . I'll enjoy rubbing it back into shape and I'll get saving for a mitaka clutch kit and a set of gearbox bearings . I'm thinking yellow for the tank . Any one out there got any LC gear selector forks lying around ?? Two of mine are shagged . Link to comment Share on other sites More sharing options...
Moderator mervin Posted March 20, 2016 Moderator Share Posted March 20, 2016 if they happen to be the same as the aircooleds then yes i have some spare selectors here , just looked at parts list and numbers are differnt Link to comment Share on other sites More sharing options...
slice Posted March 20, 2016 Share Posted March 20, 2016 With your record Kev you could knock a couple together out of an old bean can and a big hammer! 1 Link to comment Share on other sites More sharing options...
KevtheRev Posted March 20, 2016 Author Share Posted March 20, 2016 2 hours ago, mervin said: if they happen to be the same as the aircooleds then yes i have some spare selectors here , just looked at parts list and numbers are differnt Thanks Mervin , I'll see if I can find out . As far as I know there's a few bikes and the Banshee Quad all sharing the same set up . Link to comment Share on other sites More sharing options...
KevtheRev Posted March 20, 2016 Author Share Posted March 20, 2016 3 hours ago, mervin said: if they happen to be the same as the aircooleds then yes i have some spare selectors here , just looked at parts list and numbers are differnt Thanks Mervin , I'll see if I can find out . As far as I know there's a few bikes and the Banshee Quad all sharing the same set up . Right , Selector fork part numbers - 2GU-18511-00 Fork #1 2GU-18512-00 Fork #2 . I think 2GU is the model code for the Banshee quad but the digits are the same on the LC . Cheers Mervin . 1 hour ago, slice said: With your record Kev you could knock a couple together out of an old bean can and a big hammer! Needs must when the Divil drives Slice ! lol ! Not sure which model yours are from Mervin but this link is for the '79 400F ,http://www.mrcycles.com/oemparts/a/yam/50041cb4f8700209bc7861a1/shifter-1 1 Link to comment Share on other sites More sharing options...
KevtheRev Posted March 21, 2016 Author Share Posted March 21, 2016 Any luck Mervin ? Link to comment Share on other sites More sharing options...
Moderator mervin Posted March 22, 2016 Moderator Share Posted March 22, 2016 message sent Link to comment Share on other sites More sharing options...
Moderator mervin Posted March 29, 2016 Moderator Share Posted March 29, 2016 Kev do these look right ? All 4 have 328 written on them . That is 2x no1 and 2x no2 in the pics Link to comment Share on other sites More sharing options...
KevtheRev Posted March 30, 2016 Author Share Posted March 30, 2016 Man they're Identical except for the split pins ! Mine don't have those . I managed to track down the two I need from one o' the blokes over on the RDLCcrazy forum . So I'll leave those with you in case someone needs those exact ones . Glad you posted the pics . Thanks for taking the time Mervin , much appreciated . Link to comment Share on other sites More sharing options...
Moderator mervin Posted March 30, 2016 Moderator Share Posted March 30, 2016 no worries mate only to glad to help 1 Link to comment Share on other sites More sharing options...
Recommended Posts