Noise Posted February 13, 2016 Author Share Posted February 13, 2016 Come to think of it a few horns would look cool Haha 1 Link to comment Share on other sites More sharing options...
Noise Posted February 14, 2016 Author Share Posted February 14, 2016 Busy night tonight, so scary taking the angle grinder to the sub frame but needs must and now the seat unit is duck taped in place awaiting the steel tube to arrive to rebuild the frame. Link to comment Share on other sites More sharing options...
Noise Posted February 18, 2016 Author Share Posted February 18, 2016 Little update, got new steel bar and tubing to re make the sub frame to secure the seat, I just need to take the bar into work and shape two slugs on the lathe to fix it all together. Also had the sexy new headlight screen delivered today and had to fit it as soon as. All the way from Germany 1 Link to comment Share on other sites More sharing options...
Noise Posted February 24, 2016 Author Share Posted February 24, 2016 Finally got hold of a pipe bender and tried out the new welder to tack it in place, and I'm pleased to say that the tacks are good enough to take the weight of my fat ass. Link to comment Share on other sites More sharing options...
Noise Posted February 24, 2016 Author Share Posted February 24, 2016 Little more done tonight still getting used to the welder and it's best(ish) set up but atleast I can lift the rear of the bike up without them snapping. Cross strut in place, one more to go. Link to comment Share on other sites More sharing options...
jimmy Posted February 24, 2016 Share Posted February 24, 2016 When I was an apprentice, we used to call that type of weld a 'snotter' Did you put slugs in the frame Link to comment Share on other sites More sharing options...
Moderator drewpy Posted February 24, 2016 Moderator Share Posted February 24, 2016 1 hour ago, jimmy said: When I was an apprentice, we used to call that type of weld a 'snotter' Did you put slugs in the frame hopefully hollow ones. really needs holes drilled and weld filled too onto the slugs Link to comment Share on other sites More sharing options...
Noise Posted February 25, 2016 Author Share Posted February 25, 2016 9 hours ago, jimmy said: When I was an apprentice, we used to call that type of weld a 'snotter' Did you put slugs in the frame Yer i can see why you called them that, not the neatest way to weld im sure, think that when i move house next year and get a bigger cave i will up grade a fair few of the toys. I slugged the frame with 1" bar top and bottom. 8 hours ago, drewpy said: hopefully hollow ones. really needs holes drilled and weld filled too onto the slugs I did not know this tho, as i have already fitted the slugs and welded the fram over the top, is it a good idea for me to drill 1/4" into the slug and plug weld the hole up or will this just inadvertantly make the slug/frame weak in that spot? Link to comment Share on other sites More sharing options...
Moderator drewpy Posted February 25, 2016 Moderator Share Posted February 25, 2016 14 hours ago, Noise said: I did not know this tho, as i have already fitted the slugs and welded the fram over the top, is it a good idea for me to drill 1/4" into the slug and plug weld the hole up or will this just inadvertantly make the slug/frame weak in that spot? with the slugs being solid, there will be no "give" in that part of the frame. You may find the frame fracturing where the slug ends inside the tubing. I would still drill the outer frame over the slugs so you can get some weld onto the slug there or you will get movement when the frame flexes 1 Link to comment Share on other sites More sharing options...
Noise Posted February 26, 2016 Author Share Posted February 26, 2016 Brilliant thanks for the advise, luckly you spotted it before i got round to painting it haha Link to comment Share on other sites More sharing options...
Moderator drewpy Posted February 26, 2016 Moderator Share Posted February 26, 2016 2 hours ago, Noise said: Brilliant thanks for the advise, luckly you spotted it before i got round to painting it haha heres the thread on slugging with a link to chopper underground on the subject Link to comment Share on other sites More sharing options...
KevtheRev Posted February 28, 2016 Share Posted February 28, 2016 Hi Noise , great work there and she's looking good . What type of paint did you use on the engine covers ? It's a really nice finish . 2 Link to comment Share on other sites More sharing options...
Noise Posted February 29, 2016 Author Share Posted February 29, 2016 Sent you a reply Kev Here's it on EBay http://pages.ebay.com/link/?nav=item.view&id=281518704303&alt=web Link to comment Share on other sites More sharing options...
Noise Posted March 31, 2016 Author Share Posted March 31, 2016 Hey Guys, after a little advice if possible? Making good progress on the build, so i decided to plug the loom in and see if she would turn over to move the oil around the motor. All plugs in and fully charged battery, turn the key (head light and rear light come on) push the starter button.......................nothing. checked the kill switch and that was on "run" Tried to turn the lights off on the switch gear and they just stay on, tried the horn and that too failed to work, same with the indicators and high low switch. I then also noticed that the idiot lights do not work??? I have not messed with the loom at all as im not even going to open that can of worms again and it all worked before the bike was stripped down so im baffled as to why only the lights come on and stay on and thing else works. I shorted out the starter relay with the screw driver which did rotate the engine but this is just bypassing the problem. Is this a possible earth problem do you think? Link to comment Share on other sites More sharing options...
Moderator drewpy Posted March 31, 2016 Moderator Share Posted March 31, 2016 sounds like an earth or live issue. Leccy will always find the easiest path so that's through the headlamps to earth. Most newish bikes (my '87 FZ does) have diodes which prevent back flow. maybe that's been omitted? 1 Link to comment Share on other sites More sharing options...
slice Posted March 31, 2016 Share Posted March 31, 2016 Yeah Noise, sounds like an earth problem mate. Have you painted the frame? If so clean the areas off that the earth wires attach to, had a similar thing with the XJ rear lights, forgot to mask the threads off. 1 Link to comment Share on other sites More sharing options...
Simon46 Posted March 31, 2016 Share Posted March 31, 2016 +1 bad earth Link to comment Share on other sites More sharing options...
Noise Posted April 1, 2016 Author Share Posted April 1, 2016 Yer i painted the frame and also the engine had been painted before i inherited it. Thank you all for confirming this for me, i'll get back onto the wiring as soon as i have finished painting the fuel tank and will report back with the findings. Kinda want this on the road now as the weather is picking up and i haven't ridden since i sold Betty. Link to comment Share on other sites More sharing options...
Noise Posted April 1, 2016 Author Share Posted April 1, 2016 Here be a few piccies for you all. 1 Link to comment Share on other sites More sharing options...
Noise Posted April 17, 2016 Author Share Posted April 17, 2016 Got some light at the end of the tunnel today. Took her out in the sun for a little wash as she was covered in dust. Just waiting on the seat bracket to dry then do the rear brake and the electrics and hopefully have her started next week. 1 Link to comment Share on other sites More sharing options...
Recommended Posts