Moderator Cynic Posted May 28, 2015 Moderator Share Posted May 28, 2015 Just a wondering where you folk get your fastners from these days. Bought some for the DT off the interweb but they have disappeared now. It was a generic 'dip' box of mixed stuff for 30 odd quid. Now run out. Some of the stuff on the top end of the tdr, esp the stuff between the cyl has got a bit 'rural' looking. Couple took the usual 'imagination' to remove. So any pointers for some allen headed stainless stuff. ta Link to comment Share on other sites More sharing options...
captf Posted May 28, 2015 Share Posted May 28, 2015 I imagine this place may be of use? http://nutsboltsandthings.co.uk/ Link to comment Share on other sites More sharing options...
Noise Posted May 28, 2015 Share Posted May 28, 2015 I get mine from my local shop http://www.wentinfasteners.co.uk/normally just rock up with a hand full of old rusty nuts and walk out with some nice new shiny S/S nuts. (insert pun if needed?) Also another good site is this one http://www.custom-fasteners.co.uk/on the left of the page under "Shop" click the nuts bolts etc button and off ye go Link to comment Share on other sites More sharing options...
Moderator DirtyDT Posted May 28, 2015 Moderator Share Posted May 28, 2015 http://www.charnwoodfasteners.co.uk/ or http://www.mrmegapack.co.uk/ or just buckets of assorted from fleabay. Link to comment Share on other sites More sharing options...
Moderator drewpy Posted May 28, 2015 Moderator Share Posted May 28, 2015 I use a2a4 fasteners as they have a really good website and is easy to navigate. I find the hardest part is getting normal 8.8 steel fasteners the same way Link to comment Share on other sites More sharing options...
Moderator Cynic Posted May 28, 2015 Author Moderator Share Posted May 28, 2015 Cheers Link to comment Share on other sites More sharing options...
Noise Posted May 29, 2015 Share Posted May 29, 2015 Don't forget to show us pics of your nuts when you get them Link to comment Share on other sites More sharing options...
Campaman Posted May 29, 2015 Share Posted May 29, 2015 I usually just nip out into our warehouse and help my self :-) We only supply in bulk mainly to automotive so are not much help, but Fabory have a large range, it just depends on the quantities you are after http://www.fabory.com/en_GB Link to comment Share on other sites More sharing options...
Recommended Posts