andy350lc Posted March 27, 2006 Share Posted March 27, 2006 good evening . hope im in the right section here !! . . .unfortunately i have stripped down my 350lc to find detonation marks all over the piston crown this has also created some scores on the bore ( l/h one only ) . on the piston is stamped 150 ? is this already the max or could it stand a rebore ????any advise appreciated cheers you lot !!!!!!!!!! Link to comment Share on other sites More sharing options...
Moderator mervin Posted March 27, 2006 Moderator Share Posted March 27, 2006 Yes andNo you are not on the limit of available pistons I think yamaha only did pistons too 1.5 mm over but you can get pattern pistons too 2.5 go for quality ones Prox or Mitaka or wiseco make sure the borer knows what he is doing as well Stans Stephens or Prox engineering shouidlknow waht they are doing www.prox.co.uk for prox www.stanstephens.com for stan stephens merv Link to comment Share on other sites More sharing options...
andy350lc Posted March 28, 2006 Author Share Posted March 28, 2006 Yes andNo you are not on the limit of available pistons I think yamaha only did pistons too 1.5 mm over but you can get pattern pistons too 2.5 go for quality ones Prox or Mitaka or wiseco make sure the borer knows what he is doing as well Stans Stephens or Prox engineering shouidlknow waht they are doing www.prox.co.uk for prox www.stanstephens.com for stan stephens merv nice one mervin , good news iwill contact these engineers , ,muchos appreciated Link to comment Share on other sites More sharing options...
Recommended Posts