Jump to content

DT 125 LC 1986 Running problems.


Solid
This post is 3665 days old and we'd rather you create a new post instead of adding to this one. You can't reply in this post.

Recommended Posts

Hi Guys.

Having real problems getting her to run properly.

SYMPTOM: When riding in 5th at about 60mph, If I come off the power the bike wont start to accelerate again until the speed drops to about 35mph. (Feels like she's bogging down!) Does the same thing in 4th aswell.

+ Had full top end rebuild. (Ran fine after rebuild)

+ Carb float valve replaced

+ Jets flushed and cleaned

+ Tank cleaned out and flushed

+ Adjusted mixture screw several times - no luck

+ Running slightly smaller jet at the moment - could this be source of problem?

Any help really appreciated.

Link to comment
Share on other sites

Do you want an ad-free experience? Join today and help support the Yamaha Owners Club.
  • Moderator

Needle for around three quarters throttle and main for the bit after that. Are they genuine jets or cheap fleabay ones? Is the needle set on the right height setting? Why are you using a smaller jet and is this the main, pilot or both

Link to comment
Share on other sites

  • Moderator

Tried a bit of choke when the power fades?

Link to comment
Share on other sites

Hi Guys.

There seems to be some confusion - my fault - about the size of the current jet, it was replaced during the top end rebuild. I will get in touch with the garage and find out its spec.

Thank you for your help, I'll post again when I've got more accurate info.

Link to comment
Share on other sites

×
×
  • Create New...