shaun_1990 Posted July 15, 2014 Share Posted July 15, 2014 Hey everyone I'm hoping this is in the correct section & i'm hoping it's aneasy one. Been doing some digging to swapping my exhaust from the one I have now to something abit more throaty, which I was thinking decat the bike & happy days but this is a tough one as can't find the parts. After a couple of hours of looking I have found that 03-05 r6 headers with some form of link pipe & a slip on can will do the trick once I have bent a pipe so the header doesnt catch the sump. Where could I get a link pipe & how would I be able to mount a slip on to a link pipe & is there such a thing that exists? How will the lamda sensor plug in? Please tell me if I have missed anything & any advice would be great, think I have done to much digging & confused myself haha. Shaun Link to comment Share on other sites More sharing options...
shaun_1990 Posted July 16, 2014 Author Share Posted July 16, 2014 must be somebody out there that can shed some light Link to comment Share on other sites More sharing options...
Moderator DirtyDT Posted July 16, 2014 Moderator Share Posted July 16, 2014 Most people who want a little more noise slip a can only on. I don't know if a system exists but you could get one made. They weld/braze a lambada sensor threaded plug on a system if you want to retain it. I am not sure if anything de-cat'ed would pass an MOT these days. Link to comment Share on other sites More sharing options...
shaun_1990 Posted July 17, 2014 Author Share Posted July 17, 2014 Cheers for the reply, yeah I have done digging & found a full artow system which I am seriously thinking about getting now. Easier to fit also no hassle Link to comment Share on other sites More sharing options...
Recommended Posts