x-kid Posted June 23, 2014 Share Posted June 23, 2014 I'm wanting to strip the rims of my bike and polish them up to a mirrored finish, i have heard that modern day paint can be a real pain to remove. Anyone know of a good paint stripper? i have heard that aircraft remover is good but cant find it in the U.K. Once i have the paint off, how is the best way to get a mirrored finish? Thanks X-KID Link to comment Share on other sites More sharing options...
Moderator Airhead Posted June 23, 2014 Moderator Share Posted June 23, 2014 I'm wanting to strip the rims of my bike and polish them up to a mirrored finish, i have heard that modern day paint strippers are useless. Anyone know of a good paint stripper? i have heard that aircraft remover is good but cant find it in the U.K. Once i have the paint off, how is the best way to get a mirrored finish? Thanks X-KID edited for accuracy, try starchem synstrip, comes in a 5l container and will work best if the rim is submersed for 1/2 hour before jet washing but this would remove the paint from the inside of the rim too! Link to comment Share on other sites More sharing options...
Moderator DirtyDT Posted June 23, 2014 Moderator Share Posted June 23, 2014 ....try starchem synstrip..... Is that stuff any good Paul? Link to comment Share on other sites More sharing options...
Noise Posted June 23, 2014 Share Posted June 23, 2014 Scratch the paint with a wire brush, then a libberal amount of DOT4 will work. Nitromorse used to be great but they seam to have made it hippy freindly now Link to comment Share on other sites More sharing options...
x-kid Posted June 23, 2014 Author Share Posted June 23, 2014 Thanks for the replies guys, the idea of submersing the rim is great, but i only want to remove the paint from the edges of the rim, and the sides of the cast spokes that face outwards. would masking off all other areas and applying starchem synstrip to the areas i want stripping with a brush work?? Link to comment Share on other sites More sharing options...
Moderator Airhead Posted June 23, 2014 Moderator Share Posted June 23, 2014 it may do I cant say for sure but it's the only stripper I know that works nowadays, if you do get some you should wear goggles and gloves as it stings like the old notromors used to do Link to comment Share on other sites More sharing options...
Noise Posted June 24, 2014 Share Posted June 24, 2014 If your just doing the edges mate then this modern day paint is so crap all you need to do is get some 250 - 140 grit wet and dry and just sand it off. you will find any paint stripper will bleed under any masking tape and lift off paint you want to stay on. Yes sanding it down seams like a massive task but sit infront of the TV or listen to the radio and you'll soon be done. Link to comment Share on other sites More sharing options...
Recommended Posts