keysandreas Posted May 27, 2014 Share Posted May 27, 2014 Hi Guys Newbie here and pretty chuffed with my new ybr 125, except I have a small issue. Well, maybe not so small! My dash board lights perdiodically cut out with the dipped beam. So together, and at the same time, they will cut out and it feels like a bad connection somewhere. Then they'll all come on again - then go out - perhaps because of a jolt from the road or I'm not sure what. Main beam however, works all the time (when i switch it on) , despite the dash being dark. Any ideas? Many Thanks Andy ps - i'm a 1st time biker, still to do my 'proper' test so go easy on me :-) Link to comment Share on other sites More sharing options...
Moderator DirtyDT Posted May 27, 2014 Moderator Share Posted May 27, 2014 Hi and welcome to the forum. Probably a bad connection - feed or earth - but you will really need to post the question in the workshop section as this section is just for saying hello in (which you have done). 1 Link to comment Share on other sites More sharing options...
keysandreas Posted May 27, 2014 Author Share Posted May 27, 2014 Thanks Mr Moderator - will do now. :-) Link to comment Share on other sites More sharing options...
blackhat250 Posted May 28, 2014 Share Posted May 28, 2014 Welcome in Andy... Link to comment Share on other sites More sharing options...
slice Posted May 28, 2014 Share Posted May 28, 2014 Hi Andy welcome tot the YOC, I would say that you have a loose or broken wire inside the headlight binacle, easy to fix and a bugger to find usually, best get out your multimeter and wire brush cos it's either a broken wire or not earthing properly. Link to comment Share on other sites More sharing options...
Recommended Posts