rossonza Posted August 1, 2014 Author Share Posted August 1, 2014 Lights turned up today. Swapping the valves out tonight :-) Link to comment Share on other sites More sharing options...
rossonza Posted August 2, 2014 Author Share Posted August 2, 2014 Valve stem seals on order. Arriving next week. Engine back together mid august and hopefully rear light on. Mot and wheelies Link to comment Share on other sites More sharing options...
rossonza Posted August 2, 2014 Author Share Posted August 2, 2014 Right, As I'm waiting on the stem seals to arrive i decided to look at the rear light and my leaking petrol tap today. First i had to drain the fuel out of the tank: Took the tap apart and the seals had worn and i could see why it was leaking petrol even when in the off mode, It was also nearly impossible to turn the tap off/on by hand. The bottom of the fuel tap filters were caked in mud/grass. i cleaned all that up and put the new seals in: I put it all back together and whalaaaaaaa. Perfectly working fuel tap. Put a bit of silicone spray on the seals with moving parts. Smooth as butter now. Very happy. I then moved onto the rear light i've recently received: You can just about see, there is mold marks on the under side of the rear fender. Started drilling through: Im through! Drilled through the light unit using the holes ive drilled in the fender as a guide: Not sure if the rubber washers are supposed to be on top too? Anyways Before: After: Update maybe this week. Valves should be lapped/fitted, Headgasket changed. rear light to be wired in. few other little bits but then im done.... (famous last words) Link to comment Share on other sites More sharing options...
Sacha Posted August 3, 2014 Share Posted August 3, 2014 Looking good. Link to comment Share on other sites More sharing options...
rossonza Posted August 3, 2014 Author Share Posted August 3, 2014 drilled the final hole and took the top rubber washers out. Put them below and all feels nice and secure. Just ordered some more fuel hose and an inline fuel filter. The tank was clean inside but anything to help the bike breaking down will be a + for me :-) browsing ebay for more pointless things to buy now 1 Link to comment Share on other sites More sharing options...
rossonza Posted August 4, 2014 Author Share Posted August 4, 2014 More presents. WOoooooooooo 2 Link to comment Share on other sites More sharing options...
welshwan Posted August 4, 2014 Share Posted August 4, 2014 bikes looking great man!! are the new wheels all lined up now? Link to comment Share on other sites More sharing options...
rossonza Posted August 4, 2014 Author Share Posted August 4, 2014 Yeah made the spacers and they are fitted - Link to comment Share on other sites More sharing options...
welshwan Posted August 4, 2014 Share Posted August 4, 2014 like a boss. so fucking close now ! Link to comment Share on other sites More sharing options...
rossonza Posted August 6, 2014 Author Share Posted August 6, 2014 woohooo Stem seal kits arrived and so have my fuel hose/filter. Just need to sort getting over to my friends house to rebuild the head fully now. Ross. Link to comment Share on other sites More sharing options...
rossonza Posted August 11, 2014 Author Share Posted August 11, 2014 Also my friend custom made a valve spring compressor just for me :-) good friends or what?!! Head finally being rebuilt tonight. I may have Friday off so the engine may go back together then too... then maybe MOT the following week. EXCITEDDDDDDDDDDDDDD Link to comment Share on other sites More sharing options...
Sacha Posted August 11, 2014 Share Posted August 11, 2014 Link to comment Share on other sites More sharing options...
rossonza Posted August 12, 2014 Author Share Posted August 12, 2014 Old valve stem seals out: Started lapping the valves: all done by my mate ian - works in engine development Valve spring compressor on: Custom tool made by ian gave us a perfect amount of room to fit the collets: 1 new valve installed: Unfortunately thats as far as we got. My friend Ian's car ran out of MOT the other day and he hadnt realised. Hes since also found a lot of rot on his car which needs welding. so obviously his daily vehicle takes priority. I've got Friday off so im hopefully going to finish the valves then. reinstall head over the weekend and book an mot for the following weekend/week. Cheers Ross. Link to comment Share on other sites More sharing options...
jimmy Posted August 12, 2014 Share Posted August 12, 2014 Great read so far mate....Nowt like good mates to help you out. Link to comment Share on other sites More sharing options...
rossonza Posted August 12, 2014 Author Share Posted August 12, 2014 Yeah, I honestly dont have the mechanical know how to do this myself. Would have been a builder/garage job otherwise so i am extremely grateful. Im a computer guy :-) who enjoys bikes Link to comment Share on other sites More sharing options...
rossonza Posted August 21, 2014 Author Share Posted August 21, 2014 Its done!, heads got the new valves in, all lapped and ready to go. Just need to pop to my mates to collect the head off him, refit cams and shim. re-fit the head and test fire her up :-) its just wire in rear light, bleed front brake and MOT...oh maybe get some fuel and do some engine tuning to get her running right. :drool: :drool: :dirtbike: Link to comment Share on other sites More sharing options...
Sacha Posted August 22, 2014 Share Posted August 22, 2014 Nice! Link to comment Share on other sites More sharing options...
rossonza Posted August 31, 2014 Author Share Posted August 31, 2014 bad times.... Well as you all know from above, my head was built and ready to go on. So Dan and Ian came over Saturday and we started work :-) coffee at the ready: Unfortunately we found a problem when attempting to fit the no3 inlet bucket Well it turns out the no3 inlet valve was bent, so the spring wasn't sitting right, causing the bucket to not go in straight/snag. This is how I've left the bike: My mate Ian has taken the entire engine back to his to hopefully run the head through a parts washer and rebuild once my new parts arrive. I've ordered a single inlet valve and new stem seals again. 9th-15th Sept for my delivery from the USA. very frustrated now..., as through no fault of my own the bikes not on the road. we did manage to bleed my front brake mind, so not a fully wasted day... arhghghghggh Link to comment Share on other sites More sharing options...
Sacha Posted September 1, 2014 Share Posted September 1, 2014 Damn setbacks. but it'll make it that much sweeter when you do get her on the road. Link to comment Share on other sites More sharing options...
rossonza Posted September 2, 2014 Author Share Posted September 2, 2014 Heads been parts washed and ice blasted, Supposedly the parts wash wasnt lifting the deep grime off:Before:After: Looking much better i reckon. My single valve got dispatched today :-) also ordered some dremel tools so i can clean up the porting on the exhaust etc. Link to comment Share on other sites More sharing options...
Recommended Posts