jcube_04 Posted March 10, 2014 Author Share Posted March 10, 2014 Thoroughly cleaned the carbs today, new jets should be here tomorrrow,...... Link to comment Share on other sites More sharing options...
dt502001 Posted March 10, 2014 Share Posted March 10, 2014 Take disc to big building with books (libary) ask to use a computer install disc and hit print,collect pages from nice lady. LOL it works for me,as I have no luck with printers they seem to last right up untill I need something important printed. Link to comment Share on other sites More sharing options...
Moderator drewpy Posted March 10, 2014 Moderator Share Posted March 10, 2014 just put in new float valves last night. the O ring on the needle body was so loose they fell out. Seems that its not just about the needle seats on these carbs Link to comment Share on other sites More sharing options...
jcube_04 Posted March 20, 2014 Author Share Posted March 20, 2014 Lol, ok so I'm borrowing my brother in laws computer....sorry I haven't posted any progress in a while, Ive been working 12s and college started again. Here's the progress 1 Jets came in from Sigma 7, they apparantly custom build jet kits for your specific bike and altitude so I now have 110s on carbs for 1 and 4 and 112.5s for carbs 2 an 3. Carburetor Done. 2. Stripped the valve cover, jugs, head and side covers, a little JB weld to fill in some gouges on the covers works nicely. 3. I KREEMed my gas tank, no more rusty. 4 Today, I got my valve spring compressor tool. 20$ on ebay and my valve and seals are on their way out While they are out, I will be primering and painting the engine pieces. Question: If I reuse my old valves should I get them reground? Link to comment Share on other sites More sharing options...
Moderator drewpy Posted March 20, 2014 Moderator Share Posted March 20, 2014 you can lap them your self unless you are gas flowing the head and you might want to have stepped valve seats Link to comment Share on other sites More sharing options...
jcube_04 Posted March 21, 2014 Author Share Posted March 21, 2014 Pulled apart the head today, cleaned the valves painted the engine parts. Going to add a red accent to the fins and YAHAMA logos and bake the parts tomorrow and start the reassembly.... Link to comment Share on other sites More sharing options...
feliks Posted March 21, 2014 Share Posted March 21, 2014 Unless the valves and seats are pitted I would just lap them as suggested with the suction cup and paste. Link to comment Share on other sites More sharing options...
jcube_04 Posted March 21, 2014 Author Share Posted March 21, 2014 I will be lapping them tomorrow, I bought the grinding compound today, Only thing left will be getting the right shims and assembly....Im getting a little chubby just thinking about it..... Link to comment Share on other sites More sharing options...
dt502001 Posted March 21, 2014 Share Posted March 21, 2014 If you havent allready go and view felixs section on vavle shimming and see how he mannaged to swap shims his picture secquence is better than words. Good luck with the build sound like your comming along fine,when Installing the cams can be tricky so rotate the eng 4x and recheck the timming marks and again felix has provided you wil some nice pictuers. Have fun and as always pictuers are nice so try and post a few. 1 Link to comment Share on other sites More sharing options...
jcube_04 Posted March 22, 2014 Author Share Posted March 22, 2014 Thank you everyone for your input so far, and thank you feliks for doing all this before me haha.....baked my parts yesterday and lapped my valves....getting closer Link to comment Share on other sites More sharing options...
feliks Posted March 25, 2014 Share Posted March 25, 2014 lol no problem! That's exactly why I posted so many pictures along the way... for my reference when I went back, and to help anyone else who needed it! The timing marks are on the cams themselves, NOT the sprocket (which I originally thought because they had marks on them too) so when you reinstall at TDC make sure the cam timing marks are directly up! I ended up swapping shims back and forth between a few engines and didn't need to buy any, I got lucky. If you do need some specific sizes let me know because I have a bunch of extra ones. You'll need a feeler gauge to do this so go pick up one if you haven't already got one. Link to comment Share on other sites More sharing options...
Recommended Posts