greens802 Posted February 3, 2014 Share Posted February 3, 2014 Hi all my first post, just finishing last project and during a lull awaiting parts looking ahead at dt250. Looking at the id tag on the headstock it has 9/76 but it is clearly a single shock, which my research tells me should be the last year of the twin shock. Engine and chassis numbers match so I don`t think it`s been tampered with. I`ll be looking for all the electrical components as it comes to me wired with no gizzards at all just wired to run (does run) with minimal wires, no battery, rectifier, voltage reg etc. Steve Link to comment Share on other sites More sharing options...
Moderator DirtyDT Posted February 3, 2014 Moderator Share Posted February 3, 2014 Hi and welcome to the forum. Link to comment Share on other sites More sharing options...
blackhat250 Posted February 3, 2014 Share Posted February 3, 2014 Hi steve" your engine/ frame will be 450-500-00 If its a twinshock 1976 . MX were 1M1- 000. Post up some pics . Link to comment Share on other sites More sharing options...
greens802 Posted February 5, 2014 Author Share Posted February 5, 2014 Thanks, my engine/chassis# is 1R8 000106 I need to know which model it is as the manuals are up to76 or 76 - 79 etc, maybe it is a 76 model (obviously as that is the date stamped on it) but to 77 specs for some reason? Link to comment Share on other sites More sharing options...
blackhat250 Posted February 6, 2014 Share Posted February 6, 2014 Yeh " well1R7 was the very early Mono-shock DT250, this was even before the DT250D introduced in 1977 , Very little info on this model , whats the engine number " Edit" Update, yeh 1R8 , it was the australian models,, Available in Competition Yellow or brick red,,, different carb lights etc from Euro/usa models, 1N6 - was the DT250M . -- japanese model, Link to comment Share on other sites More sharing options...
Recommended Posts