Moderator DirtyDT Posted January 28, 2014 Moderator Share Posted January 28, 2014 Got to agree. charge the battery. Check all the bulbs are 12v and 21 w Link to comment Share on other sites More sharing options...
Moderator Airhead Posted January 28, 2014 Moderator Share Posted January 28, 2014 Okay I will have a look at that tomorrow but then why won't the left hand side flash now ? Both bulbs work. you mean the right wont flash could be a bad connection of a dirty contact in the switch...or 1 Link to comment Share on other sites More sharing options...
KimB Posted January 29, 2014 Author Share Posted January 29, 2014 you mean the right wont flash could be a bad connection of a dirty contact in the switch...or Oops, yes I do haha. I will check everything mentioned tomorrow. thanks Kim Link to comment Share on other sites More sharing options...
ybrric Posted January 29, 2014 Share Posted January 29, 2014 positive, I could see through it and all the holes were clear on the side. The pilot jet doesn't have holes in the side. The pilot jet is a small single flatbladed screwdriver removable item about the size of a small pea with one tiny hole through its centre. Link to comment Share on other sites More sharing options...
KimB Posted January 29, 2014 Author Share Posted January 29, 2014 The pilot jet doesn't have holes in the side. The pilot jet is a small single flatbladed screwdriver removable item about the size of a small pea with one tiny hole through its centre. I think your thinking of the main jet. Link to comment Share on other sites More sharing options...
Moderator DirtyDT Posted January 29, 2014 Moderator Share Posted January 29, 2014 1 Link to comment Share on other sites More sharing options...
ybrric Posted January 29, 2014 Share Posted January 29, 2014 No, I mistakenly thought you were refering to the needle jet holder/emulsification tube. Forgot that pilot jet had some as well I'll go back to sleep... best of luck. Link to comment Share on other sites More sharing options...
dt502001 Posted January 29, 2014 Share Posted January 29, 2014 Kim after you are sure that you have all the right bulbs and good grounds /clean sockets,if it still wont flash try flicking the flasher relay with your finger if it flashes then the relay is sticking,sometimes you can file the contacts clean though normaly its best to just replace. Link to comment Share on other sites More sharing options...
KimB Posted January 29, 2014 Author Share Posted January 29, 2014 New Indicator bulbs all around and it works perfectly . Thanks everyone. You have all been amazing 2 Link to comment Share on other sites More sharing options...
Moderator DirtyDT Posted January 29, 2014 Moderator Share Posted January 29, 2014 We are waiting for the next question now 1 Link to comment Share on other sites More sharing options...
KimB Posted January 29, 2014 Author Share Posted January 29, 2014 We are waiting for the next question now It won't be long haha. Thank you though Link to comment Share on other sites More sharing options...
dt502001 Posted January 29, 2014 Share Posted January 29, 2014 Cool another success story for the YOC any picts of the bike?? 1 Link to comment Share on other sites More sharing options...
blackhat250 Posted January 29, 2014 Share Posted January 29, 2014 No, I mistakenly thought you were refering to the needle jet holder/emulsification tube. Forgot that pilot jet had some as well I'll go back to sleep... best of luck. .Your not all wrong YB,, the dt / Yb pilot only has 1 hole straight thru,, They all differ Glad shes all sorted kim... Link to comment Share on other sites More sharing options...
KimB Posted February 1, 2014 Author Share Posted February 1, 2014 .Your not all wrong YB,, the dt / Yb pilot only has 1 hole straight thru,, They all differ Glad shes all sorted kim... Thanks for your help. I will try get a photo when I bring it home, It passed it's mot though, had a couple minors but no Issue so that's great too Kim 1 Link to comment Share on other sites More sharing options...
Moderator Airhead Posted February 1, 2014 Moderator Share Posted February 1, 2014 Thanks for your help. I will try get a photo when I bring it home, It passed it's mot though, had a couple minors but no Issue so that's great too Kim Great news kim, have fun Link to comment Share on other sites More sharing options...
Recommended Posts