Moderator DirtyDT Posted January 28, 2014 Moderator Posted January 28, 2014 Got to agree. charge the battery. Check all the bulbs are 12v and 21 w
Moderator Airhead Posted January 28, 2014 Moderator Posted January 28, 2014 Okay I will have a look at that tomorrow but then why won't the left hand side flash now ? Both bulbs work. you mean the right wont flash could be a bad connection of a dirty contact in the switch...or 1
KimB Posted January 29, 2014 Author Posted January 29, 2014 you mean the right wont flash could be a bad connection of a dirty contact in the switch...or Oops, yes I do haha. I will check everything mentioned tomorrow. thanks Kim
ybrric Posted January 29, 2014 Posted January 29, 2014 positive, I could see through it and all the holes were clear on the side. The pilot jet doesn't have holes in the side. The pilot jet is a small single flatbladed screwdriver removable item about the size of a small pea with one tiny hole through its centre.
KimB Posted January 29, 2014 Author Posted January 29, 2014 The pilot jet doesn't have holes in the side. The pilot jet is a small single flatbladed screwdriver removable item about the size of a small pea with one tiny hole through its centre. I think your thinking of the main jet.
ybrric Posted January 29, 2014 Posted January 29, 2014 No, I mistakenly thought you were refering to the needle jet holder/emulsification tube. Forgot that pilot jet had some as well I'll go back to sleep... best of luck.
dt502001 Posted January 29, 2014 Posted January 29, 2014 Kim after you are sure that you have all the right bulbs and good grounds /clean sockets,if it still wont flash try flicking the flasher relay with your finger if it flashes then the relay is sticking,sometimes you can file the contacts clean though normaly its best to just replace.
KimB Posted January 29, 2014 Author Posted January 29, 2014 New Indicator bulbs all around and it works perfectly . Thanks everyone. You have all been amazing 2
Moderator DirtyDT Posted January 29, 2014 Moderator Posted January 29, 2014 We are waiting for the next question now 1
KimB Posted January 29, 2014 Author Posted January 29, 2014 We are waiting for the next question now It won't be long haha. Thank you though
dt502001 Posted January 29, 2014 Posted January 29, 2014 Cool another success story for the YOC any picts of the bike?? 1
blackhat250 Posted January 29, 2014 Posted January 29, 2014 No, I mistakenly thought you were refering to the needle jet holder/emulsification tube. Forgot that pilot jet had some as well I'll go back to sleep... best of luck. .Your not all wrong YB,, the dt / Yb pilot only has 1 hole straight thru,, They all differ Glad shes all sorted kim...
KimB Posted February 1, 2014 Author Posted February 1, 2014 .Your not all wrong YB,, the dt / Yb pilot only has 1 hole straight thru,, They all differ Glad shes all sorted kim... Thanks for your help. I will try get a photo when I bring it home, It passed it's mot though, had a couple minors but no Issue so that's great too Kim 1
Moderator Airhead Posted February 1, 2014 Moderator Posted February 1, 2014 Thanks for your help. I will try get a photo when I bring it home, It passed it's mot though, had a couple minors but no Issue so that's great too Kim Great news kim, have fun
Recommended Posts