stevecarpy Posted December 30, 2013 Share Posted December 30, 2013 Hi, when you put crankcase halves together, in my case a 250LC, what sealant do you use. I've seen Yamabond 4 mentioned but it seems hard to get in this country (google search). Cheers Link to comment Share on other sites More sharing options...
Moderator drewpy Posted December 30, 2013 Moderator Share Posted December 30, 2013 I used an oldie called wellseal, they used them on the brit iron. you apply with a fine brush either side and let dry, no squelching out between cases as the other sealants do Link to comment Share on other sites More sharing options...
blackhat250 Posted December 31, 2013 Share Posted December 31, 2013 I used blue Hylomar, whatever u use , go sparingly, Link to comment Share on other sites More sharing options...
YPVS TONE Posted December 31, 2013 Share Posted December 31, 2013 Yamabond 4 is what Yamaha say to use in their workshop manual for the LC crankcase joint but Threeebond 1104 is the same product http://www.ebay.co.uk/itm/3-BOND-GASKET-SEALANT-1-TUBE-TY-FZ-XJ-R1-TZ-YZ-CBR600-/360491846400?pt=UK_Motorcycle_Parts&hash=item53eefd0b00#ht_1120wt_721 Tony Link to comment Share on other sites More sharing options...
Preload Posted December 31, 2013 Share Posted December 31, 2013 I used Yambits sealant last time and it works fine no leaks and its Silver in colour which is a bonus. Link to comment Share on other sites More sharing options...
Moderator DirtyDT Posted December 31, 2013 Moderator Share Posted December 31, 2013 I used blue Hylomar, whatever u use , go sparingly, I'm with Blackhat on this. Comes in red also. Link to comment Share on other sites More sharing options...
stevecarpy Posted December 31, 2013 Author Share Posted December 31, 2013 Thanks for pointing me in the right direction, can't beat the experience of others Link to comment Share on other sites More sharing options...
Recommended Posts