Thedwarfamishrapper Posted December 30, 2013 Share Posted December 30, 2013 Hi Guys, I have a DT125lc mk 2 which was running great until MOT time when my side lights failed to come on. On further inspection and after referring to the Haynes manual the wiring was a bit of a shambles. Decided to rewire the bike behind the cowling as the rest of the wiring looked ok. Basically somewhere along the line I lost my spark via the coil. I found a flywheel current via a voltmeter and connected this to the coil - no spark still? Once I had connected a wire with a current to the coil the current disappeared? When I removed the wire and tested it again there is a strong current?? Im better at mechanics than I am at electronics! Any ideas? I dont want to spend money on new coil, cdi etc when its a simple fix? thanks in advance 1 Link to comment Share on other sites More sharing options...
Moderator DirtyDT Posted December 30, 2013 Moderator Share Posted December 30, 2013 No workshop questions in the bar please! Topic moved. Link to comment Share on other sites More sharing options...
Recommended Posts