blackhat250 Posted December 25, 2013 Share Posted December 25, 2013 Think you"ve got mice kev. ..... It be a split the cases kev,,, all that alloy will have ingressed the mains and crank seals,,, simlpe engine too strip tho.. Link to comment Share on other sites More sharing options...
dt502001 Posted December 25, 2013 Share Posted December 25, 2013 +1 with BH the only way to do it is a full tear down,gona have a look but almost positive that the cylinder is Nic plated so no option of rebore and with the skirts smashed off it has to be a loose bore as AH pointed out ,,or the piston was run way to long. Link to comment Share on other sites More sharing options...
up.yours Posted December 25, 2013 Author Share Posted December 25, 2013 from what he's told me they ran it way to long , if it's nickel plated how much is a new barrel and where can we purchase one.. Link to comment Share on other sites More sharing options...
Moderator Airhead Posted December 25, 2013 Moderator Share Posted December 25, 2013 Under the circumstances ...If it cant be re-bored because it's coated the cheapest option if the bore is good would be to only replace the piston, small end bearing and rings Why not have a chat with these guys about it? They have a barrel isted on ebay starting £200 but the list price for that one is £650 !,I think it's a later model Crooks Motorcyles Ltd t/a Crooks Suzuki 36-44 Crellin Street, Barrow-in-Furness, Cumbria, LA14 1DY, UK Tel: 01229 822120 Fax: 01229 870051 e-mail: [email protected] Link to comment Share on other sites More sharing options...
blackhat250 Posted December 25, 2013 Share Posted December 25, 2013 Dt50 could be right" as the TS250A 1976 model had the nickasel lined barrel. reeds were introdused then too, i will ask Gary jay hes the DJ at squires meets kev, hes a susuki offroad buffin,,,he may hav a spare barrel, Link to comment Share on other sites More sharing options...
up.yours Posted December 26, 2013 Author Share Posted December 26, 2013 the link that newman posted seems the best at the moment john, the main concern is if it's nickel coated or not, i will ask him to get some piccis of the bore and post them here, watch this space as he's out on the piss tonight and won't be sociable tomoz.. Link to comment Share on other sites More sharing options...
Moderator DirtyDT Posted December 26, 2013 Moderator Share Posted December 26, 2013 well here's the damage, what do you think.. one I think that is broken Kev. Follow the advice, the engine needs strippping. You can probibly get the barrel re-lined ( to do away with the Nickasil) at PJME. Have a look here LINKY Link to comment Share on other sites More sharing options...
dt502001 Posted December 26, 2013 Share Posted December 26, 2013 These guys do a full kit for 300 us + 165 to install the sleve in the barrel http://www.lasleeve.cc/index.cfm?event=product.display&product_ID=8383 These guys do a big bore 265cc for 450. completehttp://kustom-kraft.com/SUZUKIKITS.html. Bet he will be wishing he change the piston at the recomended service interval after he see's how much it's going to cost to fix now. Link to comment Share on other sites More sharing options...
blackhat250 Posted December 26, 2013 Share Posted December 26, 2013 Theres dave in Bradford, Its deffo a nicosil coated all RM"s after early1980"s Road and dirt performance bikesUnit 4 the sidings leeds roadwindhill shipley bradfordbd181bntel 01274 530282email [email protected]Read more: http://the2strokeforum.proboards.com/thread/2999/stroke-crank-rebuilds-rebores-tuning#ixzz2obljTDaT Link to comment Share on other sites More sharing options...
up.yours Posted December 26, 2013 Author Share Posted December 26, 2013 thanks guys , i,m still waiting for him to get some piccs back to me of the bore. the bikes round at his mates gaff and every time he goes down their they start drinking (kids eh) and nowt gets done.. theirs a guy in radcliff near here who rebuilds all the local off road / track bikes. he supposed to be getting a quote off him and comparing it with my mate dave, but keep the links comming guys as we may be able to buy the parts cheep or get stuff sent away .. cheers kev. Link to comment Share on other sites More sharing options...
Moderator Airhead Posted January 19, 2014 Moderator Share Posted January 19, 2014 Is it fixed then? Is it fixed then? Is it fixed then? Is it fixed then? Is it fixed then? Is it fixed then? Is it fixed then? Is it fixed then? Is it fixed then? Is it fixed then? Is it fixed then? Is it fixed then? Is it fixed then? Is it fixed then? Is it fixed then? Is it fixed then? Is it fixed then? Is it fixed then? Is it fixed then? Is it fixed then? Is it fixed then? Is it fixed then? Is it fixed then? Is it fixed then? Is it fixed then? Is it fixed then? Is it fixed then? Is it fixed then? Is it fixed then? Is it fixed then? Is it fixed then? Is it fixed then? Is it fixed then? Is it fixed then? Is it fixed then? Is it fixed then? Is it fixed then? Is it fixed then? Is it fixed then? Is it fixed then? Is it fixed then? Is it fixed then? Is it fixed then? Is it fixed then? Is it fixed then? Is it fixed then? Is it fixed then? Is it fixed then? Is it fixed then? Is it fixed then? Is it fixed then? Is it fixed then? Is it fixed then? Is it fixed then? Is it fixed then? Is it fixed then? Is it fixed then? Is it fixed then? Is it fixed then? Is it fixed then? Is it fixed then? Is it fixed then? Is it fixed then? Is it fixed then? Is it fixed then? Is it fixed then? Is it fixed then? Is it fixed then? Is it fixed then? Is it fixed then? Is it fixed then? Is it fixed then? Is it fixed then? Is it fixed then? Is it fixed then? Is it fixed then? Is it fixed then? Is it fixed then? Is it fixed then? Is it fixed then? Is it fixed then? Is it fixed then? Is it fixed then? Is it fixed then? Is it fixed then? Is it fixed then? Is it fixed then? Is it fixed then? Is it fixed then? Is it fixed then? Is it fixed then? Is it fixed then? Is it fixed then? Is it fixed then? Is it fixed then? Is it fixed then? Thanks for the update!!!!!!! 1 Link to comment Share on other sites More sharing options...
up.yours Posted January 19, 2014 Author Share Posted January 19, 2014 not yet. ! Link to comment Share on other sites More sharing options...
Moderator Airhead Posted January 19, 2014 Moderator Share Posted January 19, 2014 damn Link to comment Share on other sites More sharing options...
up.yours Posted January 20, 2014 Author Share Posted January 20, 2014 im cringing actually ,, his mates and him ,have decided it doesn't need a re-bore , as the bore feel ok (to them) as they run their fingers around the inside and it feels smooth .. anyway a piston arrived the other day and they have fit it with new rings and bearings, ( probably with a ball pin hammer knowing them lot) so apparently , according to my lad , it is now sitting on his mates kitchen units i bet his mates wife is pleased about it. oh it's also had the engine and casing polished to , im awaiting his honour to send them to me so as i can post them on here... Link to comment Share on other sites More sharing options...
Moderator Cynic Posted January 20, 2014 Moderator Share Posted January 20, 2014 Lol When the piston blew in my dt the bits get right through the motor. Big end and mains will drop next. Maybe through the cases if its really bad. As for polishing the cases, wtf Link to comment Share on other sites More sharing options...
up.yours Posted January 20, 2014 Author Share Posted January 20, 2014 i nearly pissed myself at these, polished my arse.. note the kitchen unit. guess how long it took to do this, and this,,, 45 mins . here's the bad boy before it self destructed , Link to comment Share on other sites More sharing options...
up.yours Posted February 2, 2014 Author Share Posted February 2, 2014 well the beers kicked in and the projects been put on hold again, , but he has bought this from america it's a fmf fatty .. and these off ebay. what a tosser he put em upside down.. Link to comment Share on other sites More sharing options...
up.yours Posted February 2, 2014 Author Share Posted February 2, 2014 he just got back .. the beast is running , but it's over heating , they think it's the water pump impellers .. VIDEO COMMING SOON ! .... with more piccis Link to comment Share on other sites More sharing options...
Moderator drewpy Posted February 2, 2014 Moderator Share Posted February 2, 2014 the saga continues, At least they are learning... Link to comment Share on other sites More sharing options...
up.yours Posted February 2, 2014 Author Share Posted February 2, 2014 well. ! their is that, andy.. anyhow here's the vid of it's first start up .. it's sounding a bit sluggish to me.. also after five mins on tick over it seems to be over heating.. the in your face is aimed at me from my little weasel of a son.. well here it is .https://www.facebook.com/photo.php?v=1460320900854935&set=vb.100006311173397&type=2&theater Link to comment Share on other sites More sharing options...
Recommended Posts