Moderator Airhead Posted December 6, 2013 Moderator Share Posted December 6, 2013 I`ve ordered another ball (they`re only ZAR2,00) and if it goes in nicely I`ll leave it there. The action when turning is not smooth so will check it with 23 balls in. I wouldnt, if it's not smooth it's because the races are indented/pitted Link to comment Share on other sites More sharing options...
Moderator DirtyDT Posted December 6, 2013 Moderator Share Posted December 6, 2013 ....As long as you have the correct number of balls I think you should be okay. ?? I think Sacha has if right here. Use the right number and the right size. A quarter inch or 6mm is pretty standard but you need to check that. Once you get the size you can buy them off fleabay very cheaply. They need to be packed out with grease as well. It is a pain to replace them so I would do it once and do it properly. Link to comment Share on other sites More sharing options...
mcferreira100 Posted December 11, 2013 Author Share Posted December 11, 2013 New race did not fit properly so will replace the set with 22 as per the manual. Link to comment Share on other sites More sharing options...
mcferreira100 Posted December 15, 2013 Author Share Posted December 15, 2013 Top tip...missing race was sitting stuck inside the stem...now I know where to find the little buggers that go missing. Link to comment Share on other sites More sharing options...
Recommended Posts