Chris 75 Posted March 9, 2013 Share Posted March 9, 2013 Other than the 2 cycle oil that goes in the tank what other oils or fluids do I need to add? If you are sitting on the bike on the seft side below the carb there is a bolt with a gasket on it and a spring under it. I took out the bolt and there appears to be oil or fluid there. How much and white tipe do I put in? On the right side next to the kick start there is a plastic cap with a dip stick on it. This compartment is empty. What type or weight of oil or fluid do I put in? Link to comment Share on other sites More sharing options...
Moderator mervin Posted March 9, 2013 Moderator Share Posted March 9, 2013 a good quality motorcycle specific 10w30 or sae30 gear oil , do not use car synthetic oil it can make the clutch slip.it should tell you how much oil is needed on the casting near the filler, I would drain the old oil and fill completely with new Link to comment Share on other sites More sharing options...
blackhat250 Posted March 10, 2013 Share Posted March 10, 2013 The bolt on left side [top of casing] with spring is the neutral detent "ball" , leave this alone, ,, Link to comment Share on other sites More sharing options...
Recommended Posts