Jump to content

Ybr heated grips


Markrolls88
This post is 4366 days old and we'd rather you create a new post instead of adding to this one. You can't reply in this post.

Recommended Posts

Do you want an ad-free experience? Join today and help support the Yamaha Owners Club.

Hi Mark, Welcome to the YOC, usually best if you do an INTRO before asking "HOW TO" as some folks like to get to know you before they will answer your questions, it's a club so you have to say Hi first, NOT knocking you just saying it's polite to say Hello. :jossun:

Link to comment
Share on other sites

  • Moderator

Dependant on the type. The easiest way is to connect them straight to the battery. Red to the +ve and black to the -ve. The disadvantage is that anyone can come along and turn them on when the ignition is off. Next simplest is to wire them to a lighting circuit. This should be done via a relay so check if the grips have a relay included. Disadvantage is that they will only work with the lights on. Last is to a part of the ignition. This needs a relay too but means that they will only work when the ignition is on and are not lights dependant. Disadvantage is that this is a little harder than the first 2 options. There is a link in my signature to take you to the intro section for a "proper" hello if you feel the need. It should help with replies.

Link to comment
Share on other sites

  • Who's Online (See full list)

    • There are no registered users currently online
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...