Grouch Posted November 11, 2012 Posted November 11, 2012 I know there's been loads of posts recently about this subject, but I'm still none the wiser. It is pitch black by 17:00 now and the headlight on my XT 125 X is just not acceptable, it is in fact useless, and I'm starting to question whether it is even bright enough for other motorists to see properly! It is starting to make me feel unsafe. I know the HID kits are a no no because they are illegal, so what is the best option to go for? L.E.D.? Xenon? Something else? Because the above are supposed to be crap as well.
Tommy Boy Posted November 11, 2012 Posted November 11, 2012 I've looked into this in the past. Personally I'd go for a decent brand Xenon. I was going to fit one to my SR125 but the older model doesn't take H4 bulbs. But without messing around with HID kits I doubt there are many options. If you are going to just upgrade the bulb, spend a bit of money. I've heard from too many people that the cheaper bulbs blow incredibly fast.
Moderator DirtyDT Posted November 11, 2012 Moderator Posted November 11, 2012 Nighbreaker bulb. LINKY
Grouch Posted November 11, 2012 Author Posted November 11, 2012 They look really good, now to try find one that fits my XT. I'll have to find the part numbers.
j0hn Posted November 16, 2012 Posted November 16, 2012 Hey, did you ever manage to change your blub? Came across these: http://www.ebay.co.uk/itm/YAMAHA-XT-125-X-55w-Xenon-High-Low-BULBS-KIT-/200542776837?pt=UK_Motorcycle_Parts&hash=item2eb147ee05
NEV Posted November 16, 2012 Posted November 16, 2012 Not tried the Nightbreaker or the 55w Xenon bulb, but did get told that the HALFORDS EXTREME BRILLIANCE H4 472 EB 12v 60/55w was a very good upgrade by a couple of lads who have got them in their bikes, very bright indeed and just the job for dark country lanes.
j0hn Posted November 25, 2012 Posted November 25, 2012 Took about 30 minutes to take apart and fit that Xenon bulb from eBay. Headlight was placed so tightly and couldn't really find a way to remove the front body as it was attached to the indicators making it harder to get your hands in. Got there in the end though and money saved Just curious if anyone would actually go to a garage to get a new headlight fitted and if so, how much would it cost?
Grouch Posted November 25, 2012 Author Posted November 25, 2012 Hey, did you ever manage to change your blub? Came across these: http://www.ebay.co.u...=item2eb147ee05 Just ordered some Took about 30 minutes to take apart and fit that Xenon bulb from eBay. Headlight was placed so tightly and couldn't really find a way to remove the front body as it was attached to the indicators making it harder to get your hands in. Got there in the end though and money saved Just curious if anyone would actually go to a garage to get a new headlight fitted and if so, how much would it cost? I have noticed how tight the headlights are on the XT's, I'm really not looking forward to changing the bublbs, but I'm not going to a garage to get it done. I've just paid £50 for a chain and sprocket kit fitting. I really need to stop being lazy. Next on the list is a rear brake disc and pads, and a rear tyre, but I'm not fitting the tyre.
j0hn Posted November 25, 2012 Posted November 25, 2012 Grouch, sorry to say that I have had to take them off and put my old ones back on again. Bike wouldn't turn over this morning and after a few tries using the ignition switch, battery went flat and had to kick start it. Then I started experiencing weird engine misses/jerks while I was riding which I thought might have been due to high load from the new bulbs. Looks like it messed up the battery so I'll have to look for a new one soon.
Grouch Posted November 25, 2012 Author Posted November 25, 2012 Grouch, sorry to say that I have had to take them off and put my old ones back on again. Bike wouldn't turn over this morning and after a few tries using the ignition switch, battery went flat and had to kick start it. Then I started experiencing weird engine misses/jerks while I was riding which I thought might have been due to high load from the new bulbs. Looks like it messed up the battery so I'll have to look for a new one soon. It might be your rectifier thats fucked and have nothing to do with the bulbs.
j0hn Posted November 25, 2012 Posted November 25, 2012 Optimate is struggling to keep the battery alive too, might not even be the bulbs, maybe something is actually wrong with the engine or the carbs are clogged. Just going to have to see how it rides tomorrow and if it still jerks then investigate further.
Grouch Posted November 26, 2012 Author Posted November 26, 2012 I'll let you klnow how I get on with my bulbs when they come. Your battery might be weak. Start a thread about it.
Speedshop Posted December 6, 2012 Posted December 6, 2012 The best way to get brighter lights is to fit head lamp relays. You lose power through the handle bar switches which causes dim lights, cleaning works for a while, but the only fix is a relay.
shambles1980 Posted December 6, 2012 Posted December 6, 2012 you should see the light on my rxs.. if im not revving the nuts off it, i may aswell have a candle in a jam jar at the front of the bike.. "something needs to be done" oh and i cant hear the horn over the engine either lol.
wild foamy Posted December 6, 2012 Posted December 6, 2012 Ah, the wonders of 6v electronics eh shambles?
Grouch Posted December 7, 2012 Author Posted December 7, 2012 I'm just going to put up with it until I get a bigger bike. Last thing I can be arsed with is messing with electrics. I've already made it worse.
shambles1980 Posted December 9, 2012 Posted December 9, 2012 Ah, the wonders of 6v electronics eh shambles? The only Wonder about it is I Wonder who the hell decided it was good enough. the lighting is a joke but the horn is rediculous... you have RINNNGA DING DING DING DING of the excelent 2 stroke. and "merp" from the horn.. Id be better of shouting, heck im sure whispering would be louder. I think I will have to do one of those mods where you mutilate the stato to get 12v. but i dont think that will help the horn at all. there must be a 12v kit for these things some where.
dt502001 Posted December 9, 2012 Posted December 9, 2012 The little screw and lock nut on the back of the horn is for adjusting the tone.
sniff6 Posted December 9, 2012 Posted December 9, 2012 When my lad got his CG125, The headlight was crap so i just soldered a car headlight plug and used a standard car headlight bulb.Its been in nearly 3years now no problems (mot etc..)lot brighter than standard aswell
Recommended Posts