pinbill Posted September 30, 2012 Share Posted September 30, 2012 Hello, I have a leaking muffler gasket on my 73 rt3. I ordered a gasket from Motorsport.com but have no idea how to put it on. I want to just take the muffler off, clean everything up, wrap the material around the muffler end a few times and put it back together. I don't even know if this is the right gasket. Does anyone have any tips on installing? Thanks, Bill Link to comment Share on other sites More sharing options...
pinbill Posted September 30, 2012 Author Share Posted September 30, 2012 , Hello, I have a leaking muffler gasket on my 73 rt3. I ordered a gasket from Motorsport.com but have no idea how to put it on. I want to just take the muffler off, clean everything up, wrap the material around the muffler end a few times and put it back together. I don't even know if this is the right gasket. Does anyone have any tips on installing? Thanks, Bill Link to comment Share on other sites More sharing options...
Moderator DirtyDT Posted September 30, 2012 Moderator Share Posted September 30, 2012 Doesn't look right. I would change 13, 15 and 18's in the link. LINKY Link to comment Share on other sites More sharing options...
pinbill Posted September 30, 2012 Author Share Posted September 30, 2012 Thanks for the reply, I am thinking that they sent the wrong gasket too. The one they sent ends in 14623-10 and the diagram calls for 14623-00. I will call them to see if I can get the right gasket. I have seen #13 for sale on Ebay. I am not too sure on the spings they have two different numbers listed for #18 but only one is available. Any ideas on which springs? any ideas on a good place to get parts for these bikes? Link to comment Share on other sites More sharing options...
flyday58 Posted October 3, 2012 Share Posted October 3, 2012 String gasket 248-14623-10-00 supersedes the -00 part number. It goes into the groove of the exhaust pipe collar #14. Clean the collar as best you can then pack the new gasket in with a screwdriver blade or similar. I used the entire length and just kept wrapping around the inside of the collar. Here you can see the groove: http://i.ebayimg.com...yo4g~~60_35.JPG I only see one part # for the springs at the site I use most, Yamahasportsplaza.com. That's where I got mine. Hope this is heppfull. Link to comment Share on other sites More sharing options...
Recommended Posts