kaneys Posted September 27, 2012 Author Share Posted September 27, 2012 stuff it heres some more http://www.cyclechaos.com/wiki/Yamaha_DT400 Even the site for the link you gave me says your wrong.. haha... http://www.cmsnl.com/yamaha-dt400c-19751976_model8553/partslist/%21SERVIC1.html#results Also your list says it was not available in USA, Canada, Europe, Oceana or Japan.. Gee a special model built for Africa.. back then would have sold heaps. Thanks anyways.. So now can you stop wasting my time please airhead and Nev.. thanks Link to comment Share on other sites More sharing options...
kaneys Posted September 27, 2012 Author Share Posted September 27, 2012 im sorry but this is the only doc. that says what you are telling me.. it is the serial number I am matching up. Link to comment Share on other sites More sharing options...
kaneys Posted September 27, 2012 Author Share Posted September 27, 2012 Anyway would you agree this is very strange indeed Link to comment Share on other sites More sharing options...
Moderator DirtyDT Posted September 28, 2012 Moderator Share Posted September 28, 2012 So now can you stop wasting my time please airhead and Nev.. thanks How rude are you! Link to comment Share on other sites More sharing options...
kaneys Posted September 28, 2012 Author Share Posted September 28, 2012 I am not out to be rude I posted on this site to get some genuine help as to what this bike is. I thought this site had genuine motorbike enthusiasts and someone may have had some experience in these types of bikes I certainly wasnt ready for the bagging sarcasm and false info that followed. I am not posting as a joke I have posted all the info i have on this bike we are aware the numbers are unique hence why we are looking for info. Link to comment Share on other sites More sharing options...
kaneys Posted September 28, 2012 Author Share Posted September 28, 2012 How rude are you! I am sorry you felt i was being rude I wasnt the one posting winky faces etc If i cant suggest someones guesses are wrong how am I to get to the right answer. Maybe it is a slang barrier between australia and america Im just trying to figure out what the bike is. Yamaha Australia are struggling to work it out so clearly the answer lies in the US. Link to comment Share on other sites More sharing options...
NEV Posted September 28, 2012 Share Posted September 28, 2012 Well you know what they say "you can lead a horse to knowledge, but you can't make it think" http://www.cmsnl.com...C1.html#resultshttp://www.cmsnl.com...C1.html#results Check the 500 out at the top of the spec sheet, then go look at your barrel again. Link to comment Share on other sites More sharing options...
Moderator DirtyDT Posted September 28, 2012 Moderator Share Posted September 28, 2012 A lot of us on the forum are uk based. The issues we have sometimes is that we try and help using the information we have gathered over the years. As with all things Internet, half of it is just plain wrong. Even official service manuals of their time are not correct as they seem to change parts on a whim. Any hybred bike will be difficult to get plain and clear information on. Even simple things like cables may have come from something completely different. That is just the way it is. When guys try and help they are giving you the best information they can. We often get questions about similar things and any diagnosis online is going to be a best guess which is based on common faults with a model, standard fault finding protocol or similar experience. Even if people have tried to help and the information that they have shared is wrong. Due to wrong information out in internetland, this often helps as it can eliminate things or lead you closer to getting a definitive answer. As frustrating as this can be you have had assistance from some of the most knowledgable and respected guys here. Er, that's about it from me. Link to comment Share on other sites More sharing options...
kaneys Posted September 28, 2012 Author Share Posted September 28, 2012 Thank you DirtyDT, I do understand that some info on the internet can be incorrect. I know it will be difficult to get a complete answer online but we are getting a better picture. The first reply I got in this forum was a smart arse comment and I think if you read the posts you will see it was not rudness on my part but confussion due to the fact that Airhead & Nev were saying the DT400C is serial Number 475-XXXXXX That every other Web site and now Yamaha Australia Say 475-xxxxxx does not exsist. Instead of saying ok then lets rethink this like lots of others are and have done on other forums. They are more obsessed with proving they are right and that is not helpful. Thank you for your concern Link to comment Share on other sites More sharing options...
kaneys Posted September 28, 2012 Author Share Posted September 28, 2012 Well you know what they say "you can lead a horse to knowledge, but you can't make it think" http://www.cmsnl.com...C1.html#resultshttp://www.cmsnl.com...C1.html#results Check the 500 out at the top of the spec sheet, then go look at your barrel again. By the way Nev you crack me up mate Link to comment Share on other sites More sharing options...
NEV Posted September 28, 2012 Share Posted September 28, 2012 By the way Nev you crack me up mate Fair dinkum Link to comment Share on other sites More sharing options...
Moderator Cynic Posted September 28, 2012 Moderator Share Posted September 28, 2012 Just throwing something onto the fire here. I'll use my DT as an example. It spent its first 5 yesrs as a private enduro ride and was found as part of a house clearance.Its an 81 frame with 79 cdi a 125/175 hybrid engine with parts from at least 3 bikes. I have cut and modded the frame too. I know cos its all me i have had the bike from 16. Wifey moans about needing a bloddy big coffin come the day i drop off. Could this explain your bike. Mine in truth is just a 175mx as far as it goes but if you get into the numbers it makes your head hurt. Just a thought. 40 years is plenty for your bike to have been mauled. Link to comment Share on other sites More sharing options...
NEV Posted September 28, 2012 Share Posted September 28, 2012 Just re-read over the thread and theres a couple of points, I'd like to clarify. Also your list says it was not available in USA, Canada, Europe, Oceana or Japan.. Gee a special model built for Africa.. back then would have sold heaps. Thanks anyways.. So now can you stop wasting my time please airhead and Nev.. thanks. You'd be surprised the later DT'S, TDR's, TZR's were country specific, ie France, Italy and Switzerland being a couple that spring to mind, all being in EUROPE, but not being supplied to Europe as a whole until a year after. The first reply I got in this forum was a smart arse comment and I think if you read the posts you will see it was not rudness on my part but confussion due to the fact that Airhead & Nev were saying the DT400C is serial Number 475-XXXXXX I've read, re-read, and read again, and nowhere can I see I answered in any relevance to a 475-xxxxxx serial number, what I did do was to re-iterate that the model code for a DT400C is 574.Somewhere for you to use as a start off, to find whatever serial goes with a 76 DT400C. Personaly I think someone needs to sit on the naughty step, until they come up with an apology. Link to comment Share on other sites More sharing options...
kaneys Posted September 28, 2012 Author Share Posted September 28, 2012 So Nev your saying that the the DT400C model is 475 but the engine serial number could start with 401-XXXXXXX. If this is so please look at my original post. At first glance it looks like a DT400 engine in a MX250B frame, but the guys at Yamaha had it for a couple of weeks and said there have been Modifications Frame # 509-007392 Engine # 574-000323 there is a 50000 stamped under the head fins From what I can see the 574- engine number is not a dt400 number at all Based on the above why would you be focussing on the model code at all if it has nothing to do with what I asked..... Gees.. talk about not being helpfull More rudeness Personaly I think someone needs to sit on the naughty step, until they come up with an apology. Personaly I think someone need to sit on the STOP POSTING step, if your want to keep going on about some model code. No apology coming from me mate, stop holding your breathe you with pass out.. Link to comment Share on other sites More sharing options...
kaneys Posted September 28, 2012 Author Share Posted September 28, 2012 Just throwing something onto the fire here. I'll use my DT as an example. It spent its first 5 yesrs as a private enduro ride and was found as part of a house clearance.Its an 81 frame with 79 cdi a 125/175 hybrid engine with parts from at least 3 bikes. I have cut and modded the frame too. I know cos its all me i have had the bike from 16. Wifey moans about needing a bloddy big coffin come the day i drop off. Could this explain your bike. Mine in truth is just a 175mx as far as it goes but if you get into the numbers it makes your head hurt. Just a thought. 40 years is plenty for your bike to have been mauled. Thank you Cynic, I appreciate your input. We did think of that Yamaha had the bike for a couple of weeks and come up short on what it is apart from the fact the frame appears to be a mx250 frame and that it is original. They also believe that the engine is 500cc, but it is possible that it is a hybrid done by yamaha. Link to comment Share on other sites More sharing options...
NEV Posted September 28, 2012 Share Posted September 28, 2012 So Nev your saying that the the DT400C model is 475 but the engine serial number could start with 401-XXXXXXX. If this is so please look at my original post. Erm nope, I'm saying your 400c engine is a 574, hence the pic of the model code I posted as the 400c engine being a model code 574 I'm also saying that your engine is a 500 series for 1976 and not the 1977 1m2 series that it became. thats on the CMSNL website link I sent you. Link to comment Share on other sites More sharing options...
kaneys Posted September 28, 2012 Author Share Posted September 28, 2012 So you are saying that the 76 DT400c engine serial numbers would have been 475-XXXXXXX.. ? Link to comment Share on other sites More sharing options...
NEV Posted September 28, 2012 Share Posted September 28, 2012 now yer doing it on purpose, ya must be. Link to comment Share on other sites More sharing options...
kaneys Posted September 28, 2012 Author Share Posted September 28, 2012 now yer doing it on purpose, ya must be. So the engine model code has nothing to do with the engine serial number or what??.. I dont know what you are going on about and Im pretty sure you dont Link to comment Share on other sites More sharing options...
Sacha Posted September 28, 2012 Share Posted September 28, 2012 From my perspective it looks like you listed the engine number as 574.xxx and the spec sheet Nev posted lists that number as a 1976 DT400C. So that would be the engine model based on the 574 prefix. Maybe I misunderstand. ?? What's the original question? I've lost sight of it amidst the raucous. (she said playfully not meaning offense to anyone) Link to comment Share on other sites More sharing options...
Recommended Posts