Jump to content

rd400


armfaw
This post is 4499 days old and we'd rather you create a new post instead of adding to this one. You can't reply in this post.

Recommended Posts

we are restoring our rd400.. will the fork stantions fit from a lc?.. we want to put twin discs on the front....Image031.jpg

Link to comment
Share on other sites

Do you want an ad-free experience? Join today and help support the Yamaha Owners Club.
  • Moderator

good project, I think Merv will be back on here and extiling the virtures and vices of the aircooled rd club of which I frequent. You would get a lot more advice from there.

not sure of the model you have, but the brakes are the same as the xs range from 250 to 1100. If you have a bracket on the left hand fork stantion you could use SR500 brakes which are left handed. The wheels normally come pre-drilled to take another disk.

even better, I think the aprillia rs125 fits and has stonking brakes on them (they fit the xs400 frames of which the rd uses the same headstock bearings)

Link to comment
Share on other sites

good project, I think Merv will be back on here and extiling the virtures and vices of the aircooled rd club of which I frequent. You would get a lot more advice from there.

not sure of the model you have, but the brakes are the same as the xs range from 250 to 1100. If you have a bracket on the left hand fork stantion you could use SR500 brakes which are left handed. The wheels normally come pre-drilled to take another disk.

even better, I think the aprillia rs125 fits and has stonking brakes on them (they fit the xs400 frames of which the rd uses the same headstock bearings)

its an rd400 E, 1980-81

Link to comment
Share on other sites

all the RD experts are on http://www.aircooled...rum/default.asp lc stanchions are only 32 mm i believe that will be 35mm , look at XS 650 or summat like that where are yuo in Cornwall then ?

menheniot..... thanks for that.. :)

Link to comment
Share on other sites

  • Who's Online (See full list)

    • There are no registered users currently online
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...