Jump to content
This post is 4556 days old and we'd rather you create a new post instead of adding to this one. You can't reply in this post.

Recommended Posts

Posted

HI all learned Yamaha owners - I am new to Yamahas although i have a Suzuki in the past - i have recently bought the TX750 OHC and realising parts are scarce in the UK i was wondering what parts from other Yams retrofit? starters solenoids master cylinders and calipers - any info from other TX owners 500/750 or access to new old stock would be great. It seems i have a mountain to climb.

Currently i have a starter issue - got 12v at the starter throught the solenoid and amps to turn it direct from a free standing battery and thick jump cables but its clicking at the solenoid when i wire the battery in to the bike it seems like the cables are too small or the starter is not turning due to resistance may need overhauling although as i said jumper cables do turn the starter.

any feedback on this issue would be great

Do you want an ad-free experience? Join today and help support the Yamaha Owners Club.
Posted

Welcome izouin" Take off all connections , and clean , then new battery, if wires wern"t heavy enuff" they,, would be Hot,

  • Moderator
Posted

Hi and welcome to the forum.

  • 3 weeks later...
  • Moderator
Posted
:welcome: tx750's are rare and a one off, good luck
  • Who's Online (See full list)

    • There are no registered users currently online
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...