izouin Posted May 17, 2012 Share Posted May 17, 2012 HI all learned Yamaha owners - I am new to Yamahas although i have a Suzuki in the past - i have recently bought the TX750 OHC and realising parts are scarce in the UK i was wondering what parts from other Yams retrofit? starters solenoids master cylinders and calipers - any info from other TX owners 500/750 or access to new old stock would be great. It seems i have a mountain to climb. Currently i have a starter issue - got 12v at the starter throught the solenoid and amps to turn it direct from a free standing battery and thick jump cables but its clicking at the solenoid when i wire the battery in to the bike it seems like the cables are too small or the starter is not turning due to resistance may need overhauling although as i said jumper cables do turn the starter. any feedback on this issue would be great Link to comment Share on other sites More sharing options...
blackhat250 Posted May 17, 2012 Share Posted May 17, 2012 Welcome izouin" Take off all connections , and clean , then new battery, if wires wern"t heavy enuff" they,, would be Hot, Link to comment Share on other sites More sharing options...
Moderator DirtyDT Posted May 18, 2012 Moderator Share Posted May 18, 2012 Hi and welcome to the forum. Link to comment Share on other sites More sharing options...
Moderator Airhead Posted May 18, 2012 Moderator Share Posted May 18, 2012 Greetings izouin and yeah start a topic in workshop and leave this forum for intros mate...Thanks Link to comment Share on other sites More sharing options...
izouin Posted June 7, 2012 Author Share Posted June 7, 2012 Yes agreed thanks for the tip:) Link to comment Share on other sites More sharing options...
Moderator drewpy Posted June 7, 2012 Moderator Share Posted June 7, 2012 tx750's are rare and a one off, good luck Link to comment Share on other sites More sharing options...
Recommended Posts