skik Posted February 2, 2012 Posted February 2, 2012 hi all.i have fitted raised handle bars on my sr250 and now the brake cable is to tight a fit.i can only find standard size cables for it in the uk.is there another model with same but longer cable i could order?
YPVS TONE Posted February 2, 2012 Posted February 2, 2012 Seem to remember the early SR250 had fairly high bars as standard anyway or has yours got low bars on it. Can you post a picture?
skik Posted February 2, 2012 Author Posted February 2, 2012 it had straight bars on when i got it.and the guy said that the cables were orginal.hpoe these photos come out as im still trying to get the
splittie65 Posted February 5, 2012 Posted February 5, 2012 Venhill Engineering make cables to order.......http://www.venhill.co.uk/ They are making some custom cables for me at the moment......their cables are sold worldwide.
Moderator Airhead Posted February 5, 2012 Moderator Posted February 5, 2012 lets have a photo of the cable to brake drum fixing and adjustment, i'm wondering if a DT175MX cable would do it...readily available and cheap.
skik Posted February 5, 2012 Author Posted February 5, 2012 (edited) lets have a photo of the cable to brake drum fixing and adjustment, i'm wondering if a DT175MX cable would do it...readily available and cheap. Edited February 6, 2012 by mervin add picture
skik Posted February 5, 2012 Author Posted February 5, 2012 (edited) Edited February 6, 2012 by mervin add picture
Moderator Airhead Posted February 6, 2012 Moderator Posted February 6, 2012 picture not there mate, copy the bottom box not the one with http at the front
Moderator mervin Posted February 6, 2012 Moderator Posted February 6, 2012 Weird cos i used the same address each time and is has worked just fine
Moderator Airhead Posted February 6, 2012 Moderator Posted February 6, 2012 DT175MX cable Total length to end of nipples = 132cm Sheath length to end of adjustment thread = 119.5cm adjustment thread 8mm Patterns easily available from ebay, yambits, wemoto etc
skik Posted February 7, 2012 Author Posted February 7, 2012 picture not there mate, copy the bottom box not the one with http at the front i did copy the bottom one.anyway thanks for the dt175 cable idea.that lenght will do.thanks everyone for the help.
delvey91 Posted February 8, 2012 Posted February 8, 2012 Ur cable is at full adjustment just slacken it y0
Moderator mervin Posted February 9, 2012 Moderator Posted February 9, 2012 Ur cable is at full adjustment just slacken it y0 Yes and next you will be telling him to use a bit of baler cord instead of a cable i know you old Devon Farm types Jack
Moderator Airhead Posted February 9, 2012 Moderator Posted February 9, 2012 Ur cable is at full adjustment just slacken it y0 That'll be because its too short
Recommended Posts