Jump to content
This post is 4733 days old and we'd rather you create a new post instead of adding to this one. You can't reply in this post.

Recommended Posts

Posted

Hey guys was going for a ride on my DT 125 2000 when half way through my trip the bike just died. and after removing the spark plug and replacing it there is no spark. I have replace the ignition coil and regulator but still no joy :( the the dash works etc..... but bit strange how the bike just died. any ideas?

Do you want an ad-free experience? Join today and help support the Yamaha Owners Club.
Posted

Try the wire from ignition [ usualy black/white. ] this is one to kill switch also;; dsiconect them, , if this fails , C.DI. box, conetions etc,,,

Posted

hey guys did that no luck :( thinking it may be cdi.... but the old school cdi 1998 which attachd the oil container

  • Moderator
Posted

Get your manual see whats what and check every wire.

I had this happen to me years ago, problem, one of the coil wires had touched the exhaust and earthed its self. Couldn't see it till the seat was off.

  • Who's Online (See full list)

    • There are no registered users currently online
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...