I have a set of forks on my 76 dt 175 with two sets of seals in them. the parts list shows only one seal but there are two seals on my forks. the upper seal, fits into the lower seal. in the picture, the the left has the seal intact. I had to destroy the seal to remove it...

does anyone have a part number for a lower fork seal

For europe look at http://www.cmsnl.com/

for usa http://www.yamaha-motor.com/sport/myyamaha/prompt/L3Nwb3J0L3BhcnRzL2hvbWUuYXNweA==/Parts%20Catalog/starthere.aspx

The new replacement seals are single piece, 12mm wide seals.

Unlike the originals which were in 2 Individual (upper and lower) parts.

V.

yambits will get you them...is it a twin shock bike then?

Any idea why the old parts diagrams do not show two seals? It has twin shocks, The replacements that I bought (PN-137-23145-01-00) would be two small with out the lower seal intact and also not thick enough... as to reach to the top of the retaining clip...

I'll mic the lower tubes and see what YAMBITS can find...

Jt