jtjansen Posted October 16, 2011 Share Posted October 16, 2011 I have a set of forks on my 76 dt 175 with two sets of seals in them. the parts list shows only one seal but there are two seals on my forks. the upper seal, fits into the lower seal. in the picture, the the left has the seal intact. I had to destroy the seal to remove it... does anyone have a part number for a lower fork seal Link to comment Share on other sites More sharing options...
Moderator mervin Posted October 16, 2011 Moderator Share Posted October 16, 2011 For europe look at http://www.cmsnl.com/ for usa http://www.yamaha-motor.com/sport/myyamaha/prompt/L3Nwb3J0L3BhcnRzL2hvbWUuYXNweA==/Parts%20Catalog/starthere.aspx Link to comment Share on other sites More sharing options...
Ventura Posted October 16, 2011 Share Posted October 16, 2011 The new replacement seals are single piece, 12mm wide seals. Unlike the originals which were in 2 Individual (upper and lower) parts. V. Link to comment Share on other sites More sharing options...
Moderator Airhead Posted October 16, 2011 Moderator Share Posted October 16, 2011 yambits will get you them...is it a twin shock bike then? Link to comment Share on other sites More sharing options...
jtjansen Posted October 16, 2011 Author Share Posted October 16, 2011 Any idea why the old parts diagrams do not show two seals? It has twin shocks, The replacements that I bought (PN-137-23145-01-00) would be two small with out the lower seal intact and also not thick enough... as to reach to the top of the retaining clip... I'll mic the lower tubes and see what YAMBITS can find... Jt Link to comment Share on other sites More sharing options...
Recommended Posts