bella9 Posted July 23, 2011 Posted July 23, 2011 hi guys i am having some trouble with my pv , it was fine a few days ago ,but i turned my key about an hour ago and i couldnt hear my pv servo ,so i striped it down made sure everyting was connected ,wich everthing was so i started it and went on it and its flat until i get to about 35-40 then it starts to kick in so i was just wondering do i need a new pv unit any help would be great thanks
Moderator Airhead Posted July 23, 2011 Moderator Posted July 23, 2011 did you leave some (just a little) slack in the cables? I would take out the PV and clean it up with a rag and white spirit, could be gunged up? Try disconnecting the cables and see if it feels locked up
Moderator mervin Posted July 24, 2011 Moderator Posted July 24, 2011 sounds like the PV controller or motor has died , my TDR did this recently, the Reg rec died and put a high voltage through everything blew bulbs rev counter CDi Pv unit the lot , and the symptoms where very similar to yours
Recommended Posts